Discussion:
Can't use my Pinnacle PCTV HD Pro stick - what am I doing wrong?
(too old to reply)
George Adams
2009-06-21 02:42:27 UTC
Permalink
Hello. I'm having problems getting my (USB) PCTV HD Pro Stick (800e,
the "old" style) to work under V4L. Could anyone spot the problem in
what I'm doing?

I'm running Ubuntu 8.04.2 LTS (the 2.6.24-24-server kernel), and am
following this procedure (based on
http://www.linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_=
V4L-DVB_Device_Drivers).=20
I intend to use this to tune to USA NTSC channel 3 (to capture a
close-captioned feed inside our building)

1) Copy the firmware I need (xc3028-v27.fw) to /lib/firmware

2) cd /usr/local/src

3) hg clone http://linuxtv.org/hg/v4l-dvb

4) cd v4l-dvb

5) make rminstall; make distclean; make; make install

These seems to do what it's supposed to - installs the drivers into
/lib/modules/2.6.24-24-server . My PCTV HD Pro Stick uses the em28xx
drivers.
find /lib/modules/ -type f -name "em28*" -mtime -1
/lib/modules/2.6.24-24-server/kernel/drivers/media/video/em28xx/em2=
8xx.ko
/lib/modules/2.6.24-24-server/kernel/drivers/media/video/em28xx/em2=
8xx-dvb.ko

6) Reboot with the USB capture device plugged in

7) Examine "dmesg" for details related to the capture device

- em28xx: New device Pinnacle Systems PCTV 800e @ 480 Mbps (2304:0227, =
interface 0, class 0)
- em28xx #0: Identified as Pinnacle PCTV HD Pro Stick (card=3D17)
- em28xx #0: chip ID is em2882/em2883
- - -> GSI 22 (level, low) -> IRQ 22
- PCI: Setting latency timer of device 0000:00:1b.0 to 64
- em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 27 02 d0 12 5c 03 8e 16 a=
4 1c
- em28xx #0: i2c eeprom 10: 6a 24 27 57 46 07 01 00 00 00 00 00 00 00 0=
0 00
- em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b 1c 0=
0 00
- em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 0=
0 00
- em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0=
0 00
- em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0=
0 00
- em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 24 03 50 00 6=
9 00
- em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 5=
3 00
- em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 00 00 1=
6 03
- em28xx #0: i2c eeprom 90: 50 00 43 00 54 00 56 00 20 00 38 00 30 00 3=
0 00
- em28xx #0: i2c eeprom a0: 65 00 00 00 1c 03 30 00 36 00 31 00 30 00 3=
0 00
- em28xx #0: i2c eeprom b0: 31 00 30 00 33 00 39 00 34 00 34 00 32 00 0=
0 00
- em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0=
0 00
- em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0=
0 00
- em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0=
0 00
- em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0=
0 00
- em28xx #0: EEPROM ID=3D 0x9567eb1a, EEPROM hash =3D 0x2de5abbf
- em28xx #0: EEPROM info:
- em28xx #0: AC97 audio (5 sample rates)
- em28xx #0: 500mA max power
- em28xx #0: Table at 0x27, strings=3D0x168e, 0x1ca4, 0x246a
- hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
- input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1a.7/usb4=
/4-3/input/input6
- - -> GSI 20 (level, low) -> IRQ 23
- Vortex: init.... em28xx #0: Config register raw data: 0xd0
- em28xx #0: AC97 vendor ID =3D 0xffffffff
- em28xx #0: AC97 features =3D 0x6a90
- em28xx #0: Empia 202 AC97 audio processor detected
- em28xx #0: v4l2 driver version 0.1.2
- em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
- usbcore: registered new interface driver em28xx
- em28xx driver loaded
- xc2028 0-0061: creating new instance
- xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
- em28xx #0/2: xc3028 attached
- DVB: registering new adapter (em28xx #0)
- DVB: registering adapter 0 frontend 0 (LG Electronics LGDT3303 VSB/QA=
M Frontend)...
- Successfully loaded em28xx-dvb
- Em28xx: Initialized (Em28xx dvb Extension) extension
- done.

Everything looks good - the drivers are getting called and the card is
recognized. However, all my attempts to get something "out of it"
aren't working. I tried firing up "tvtime", but it just launches a
blank, black screen and hanges. The menu won't come up, the channel
won't change, right-clicking isn't responsive, it won't close, and I
have to kill it.
mencoder -nosound -tv driver=3Dv4l2:width=3D640:height=3D480 tv://3 -=
o /tmp/tv.avi -ovc raw -endpos 5

MEncoder 2:1.0~rc2-0ubuntu13.1+medibuntu1 (C) 2000-2007 MPlayer Team
CPU: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz
(Family: 6, Model: 23, Stepping: 10)
CPUflags: Type: 6 MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled with runtime CPU detection.
success: format: 9 data: 0x0 - 0x0
TV file format detected.
Selected driver: v4l2
name: Video 4 Linux 2 input
author: Martin Olschewski=20
comment: first try, more to come ;-)
Selected device: Pinnacle PCTV HD Pro Stick
Tuner cap:
Tuner rxs:
Capabilites: video capture tuner audio read/write streaming
supported norms: 0 =3D NTSC; 1 =3D NTSC-M; 2 =3D NTSC-M-JP; 3 =3D NTSC=
-M-KR; 4
=3D NTSC-443; 5 =3D PAL; 6 =3D PAL-BG; 7 =3D PAL-H; 8 =3D PAL-I; 9 =3D=
PAL-DK;
10 =3D PAL-M; 11 =3D PAL-N; 12 =3D PAL-Nc; 13 =3D PAL-60; 14 =3D SEC=
AM; 15 =3D
SECAM-B; 16 =3D SECAM-G; 17 =3D SECAM-H; 18 =3D SECAM-DK; 19 =3D SEC=
AM-L; 20
=3D SECAM-Lc;
inputs: 0 =3D Television; 1 =3D Composite1; 2 =3D S-Video;
Current input: 0
Current format: YUYV
v4l2: ioctl set format failed: Invalid argument
v4l2: ioctl set format failed: Invalid argument
v4l2: ioctl set format failed: Invalid argument
v4l2: ioctl query control failed: Invalid argument
v4l2: ioctl query control failed: Invalid argument
v4l2: ioctl query control failed: Invalid argument
v4l2: ioctl query control failed: Invalid argument
[V] filefmt:9 fourcc:0x32595559 size:640x480 fps:25.00 ftime:=3D0.0=
400
Opening video filter: [expand osd=3D1]
Expand: -1 x -1, -1 ; -1, osd: 1, aspect: 0.000000, round: 1
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D
Opening video decoder: [raw] RAW Uncompressed Video
VDec: vo config request - 640 x 480 (preferred colorspace: Packed YUY2)
VDec: using Packed YUY2 as output csp (no 0)
Movie-Aspect is undefined - no prescaling applied.
Selected video codec: [rawyuy2] vfm: raw (RAW YUY2)
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D
=46orcing audio preload to 0, max pts correction to 0.
v4l2: select timeout

Skipping frame!
Pos: 0.0s 1f ( 0%) 0.96fps Trem: 0min 0mb A-V:0.000 [0:0]
Skipping frame!
v4l2: select timeout( 0%) 1.28fps Trem: 0min 0mb A-V:0.000 [0:0]

Skipping frame!
Pos: 0.0s 3f ( 0%) 1.44fps Trem: 0min 0mb A-V:0.000 [0:0]
Skipping frame!
v4l2: select timeout( 0%) 1.54fps Trem: 0min 0mb A-V:0.000 [0:0]

Skipping frame!
Pos: 0.0s 5f ( 0%) 1.60fps Trem: 0min 0mb A-V:0.000 [0:0]
Skipping frame!
v4l2: select timeout( 0%) 1.65fps Trem: 0min 0mb A-V:0.000 [0:0]

Skipping frame!
Pos: 0.0s 7f ( 0%) 1.68fps Trem: 0min 0mb A-V:0.000 [0:0]
Skipping frame!
Pos: 0.0s 8f ( 0%) 1.71fps Trem: 0min 0mb A-V:0.000 [0:0]


The resulting file (/tmp/tv.avi) is only 4K and not a valid AVI file. =20



One thing I noticed that differs from what I was expecting is that
nowhere in the "dmesg" output does it say anything about the firmware
file. I was expecting to see this in "dmesg":

- firmware: requesting xc3028-v27.fw
- xc2028 1-0061: Loading 80 firmware images from xc3028-v27.fw,=20
- type: xc2028 firmware, ver 2.7

but nothing approximating those lines appears at all. I tried deleting
/lib/firmware/xc3028-v27.fw entirely to see if it would complain, but
it loaded up exactly the same way after I rebooted... and still didn't
work.

So my questions are:

1) Why is the firmware file not being read? Has something happened to
the em28xx drivers recently that causes this file not to be needed
anymore? Or is something else going wrong?

2) Is that the reason for the problem, or have you spotted something
else I've done wrong?

Thanks greatly to anyone who can help!

_________________________________________________________________
Bing=99 brings you maps, menus, and reviews organized in one place. =
Try it now.
http://www.bing.com/search?q=3Drestaurants&form=3DMLOGEN&publ=3DWLHMTAG=
&crea=3DTEXT_MLOGEN_Core_tagline_local_1x1--
To unsubscribe from this list: send the line "unsubscribe linux-media" =
in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
George Adams
2009-06-21 19:51:02 UTC
Permalink
Thank you so much, everyone who has replied to my question! It's nice =
to find a community of people willing to help. Here is the dmesg outpu=
t that appears when the Pinnacle device gets plugged in, along with a f=
ew "ls" commands:

* usb 1-1: new high speed USB device using ehci_hcd and address 2
* usb 1-1: configuration #1 chosen from 1 choice
* Linux video capture interface: v2.00
* em28xx: New device Pinnacle Systems PCTV 800e @ 480 Mbps (2304:0227, =
interface 0, class 0)
* em28xx #0: Identified as Pinnacle PCTV HD Pro Stick (card=3D17)
* em28xx #0: chip ID is em2882/em2883
* em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 27 02 d0 12 5c 03 8e 16 a=
4 1c
* em28xx #0: i2c eeprom 10: 6a 24 27 57 46 07 01 00 00 00 00 00 00 00 0=
0 00
* em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b 1c 0=
0 00
* em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 0=
0 00
* em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0=
0 00
* em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0=
0 00
* em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 24 03 50 00 6=
9 00
* em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 5=
3 00
* em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 00 00 1=
6 03
* em28xx #0: i2c eeprom 90: 50 00 43 00 54 00 56 00 20 00 38 00 30 00 3=
0 00
* em28xx #0: i2c eeprom a0: 65 00 00 00 1c 03 30 00 36 00 31 00 30 00 3=
0 00
* em28xx #0: i2c eeprom b0: 31 00 30 00 33 00 39 00 34 00 34 00 32 00 0=
0 00
* em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0=
0 00
* em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0=
0 00
* em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0=
0 00
* em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0=
0 00
* em28xx #0: EEPROM ID=3D 0x9567eb1a, EEPROM hash =3D 0x2de5abbf
* em28xx #0: EEPROM info:
* em28xx #0: AC97 audio (5 sample rates)
* em28xx #0: 500mA max power
* em28xx #0: Table at 0x27, strings=3D0x168e, 0x1ca4, 0x246a
* input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1a.7/usb1=
/1-1/input/input6
* em28xx #0: Config register raw data: 0xd0
* em28xx #0: AC97 vendor ID =3D 0xffffffff
* em28xx #0: AC97 features =3D 0x6a90
* em28xx #0: Empia 202 AC97 audio processor detected
* em28xx #0: v4l2 driver version 0.1.2
* em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
* usbcore: registered new interface driver em28xx
* em28xx driver loaded
* xc2028 0-0061: creating new instance
* xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
* em28xx #0/2: xc3028 attached
* DVB: registering new adapter (em28xx #0)
* DVB: registering adapter 0 frontend 0 (LG Electronics LGDT3303 VSB/QA=
M Frontend)...
* Successfully loaded em28xx-dvb
* Em28xx: Initialized (Em28xx dvb Extension) extension
ls -lR /dev/dvb
/dev/dvb:
total 0
drwxr-xr-x 2 root root 120 2009-06-21 13:06 adapter0

/dev/dvb/adapter0:
total 0
crw-rw---- 1 root video 212, 1 2009-06-21 13:06 demux0
crw-rw---- 1 root video 212, 2 2009-06-21 13:06 dvr0
crw-rw---- 1 root video 212, 0 2009-06-21 13:06 frontend0
crw-rw---- 1 root video 212, 3 2009-06-21 13:06 net0
ls -l /dev/vid*
crw-rw---- 1 root video 81, 0 2009-06-21 13:06 /dev/video0



A much fuller dmesg (from the system boot) is below, but everything tha=
t appears to be em28xx-related is shown above. =20

Terry, you mentioned the program "Zapping". I've just installed in Ubu=
ntu and will give it a try when I get to the console later on. Paul, t=
hank you for your message. I will try your mplayer suggestion once I'm=
at the console. =20

One thing I failed to mention in the original e-mail is that I HAD this=
device working once before (back in February). I put the device away =
for a few months after that. Since then, Ubuntu has updated the kernel=
, so I updated and reinstalled the v4l drivers. This time, though, som=
ething seems to be going wrong, and I don't know what's different. Eit=
her 1) I've forgotten a criticial step that I did last time, or 2) some=
thing in the v4l drivers has changed resulting in a problem, or 3) the =
device itself has broken. Assuming #2 is unlikely, I intend to try to =
rule out #3 by hooking the Pinnacle device up to a Windows box tomorrow=
=2E Meanwhile, I'm operating on assumption #1: I'm missing something i=
mportant.

I don't understand why there is no mention of the Xceive tuner in the d=
mesg output, though... or an attempt to load the firmware for it.

Anway, here's a much longer dmesg. Any other information that would he=
lp, I'll be happy to add.




* Initializing cgroup subsys cpuset
* Initializing cgroup subsys cpu
* Linux version 2.6.24-24-server (***@rothera) (gcc version 4.2.4 (U=
buntu 4.2.4-1ubuntu4)) #1 SMP Wed Apr 15 16:36:01 UTC 2009 (Ubuntu 2.6.=
24-24.53-server)
* BIOS-provided physical RAM map:
* BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
* BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
* BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
* BIOS-e820: 0000000000100000 - 00000000cfeb0000 (usable)
* BIOS-e820: 00000000cfeb0000 - 00000000cfee2000 (ACPI NVS)
* BIOS-e820: 00000000cfee2000 - 00000000cfef0000 (ACPI data)
* BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
* BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved)
* BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
* BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
* 3968MB HIGHMEM available.
* 896MB LOWMEM available.
* found SMP MP-table at 000f57a0
* NX (Execute Disable) protection: active
* Entering add_active_range(0, 0, 1245184) 0 entries of 256 used
* Zone PFN ranges:
* DMA 0 -> 4096
* Normal 4096 -> 229376
* HighMem 229376 -> 1245184
* Movable zone start PFN for each node
* early_node_map[1] active PFN ranges
* 0: 0 -> 1245184
* On node 0 totalpages: 1245184
* DMA zone: 32 pages used for memmap
* DMA zone: 0 pages reserved
* DMA zone: 4064 pages, LIFO batch:0
* Normal zone: 1760 pages used for memmap
* Normal zone: 223520 pages, LIFO batch:31
* HighMem zone: 7936 pages used for memmap
* HighMem zone: 1007872 pages, LIFO batch:31
* Movable zone: 0 pages used for memmap
* DMI 2.4 present.
* ACPI: RSDP signature @ 0xC00F75D0 checksum 0
* ACPI: RSDP 000F75D0, 0014 (r0 GBT )
* ACPI: RSDT CFEE2040, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
* ACPI: FACP CFEE20C0, 0074 (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
* ACPI: DSDT CFEE2180, 50A9 (r1 GBT GBTUACPI 1000 MSFT 100000C)
* ACPI: FACS CFEB0000, 0040
* ACPI: EUDS CFEE79C0, 0500 (r1 GBT 0 0)
* ACPI: HPET CFEE7880, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 98)
* ACPI: MCFG CFEE7900, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
* ACPI: APIC CFEE7280, 0084 (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
* ACPI: SSDT CFEE87F0, 03AB (r1 PmRef CpuPm 3000 INTL 20040311)
* ACPI: PM-Timer IO Port: 0x408
* ACPI: Local APIC address 0xfee00000
* ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
* Processor #0 7:7 APIC version 20
* ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled)
* Processor #3 7:7 APIC version 20
* ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
* Processor #1 7:7 APIC version 20
* ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
* Processor #2 7:7 APIC version 20
* ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
* ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
* ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
* ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
* ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
* IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
* ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
* ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
* ACPI: IRQ0 used by override.
* ACPI: IRQ2 used by override.
* ACPI: IRQ9 used by override.
* Enabling APIC mode: Flat. Using 1 I/O APICs
* ACPI: HPET id: 0x8086a201 base: 0xfed00000
* Using ACPI (MADT) for SMP configuration information
* Allocating PCI resources starting at e6000000 (gap: e4000000:1ac00000=
)
* swsusp: Registered nosave memory region: 000000000009e000 - 000000000=
00a0000
* swsusp: Registered nosave memory region: 00000000000a0000 - 000000000=
00f0000
* swsusp: Registered nosave memory region: 00000000000f0000 - 000000000=
0100000
* Built 1 zonelists in Zone order, mobility grouping on. Total pages: =
1235456
* Kernel command line: root=3DUUID=3D2f7e91eb-9b4a-4f03-aeda-c472bd2d70=
77 ro nosplash vga=3D0x034a
* mapped APIC to ffffb000 (fee00000)
* mapped IOAPIC to ffffa000 (fec00000)
* Enabling fast FPU save and restore... done.
* Enabling unmasked SIMD FPU exception support... done.
* Initializing CPU#0
* PID hash table entries: 4096 (order: 12, 16384 bytes)
* Detected 2833.082 MHz processor.
* Console: colour dummy device 80x25
* console [tty0] enabled
* Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
* Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
* Memory: 4140224k/4980736k available (2258k kernel code, 51520k reserv=
ed, 1037k data, 384k init, 3275456k highmem)
* virtual kernel memory layout:
* fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
* pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
* vmalloc : 0xf8800000 - 0xffbfe000 ( 115 MB)
* lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
* .init : 0xc043e000 - 0xc049e000 ( 384 kB)
* .data : 0xc0334a89 - 0xc0437fe4 (1037 kB)
* .text : 0xc0100000 - 0xc0334a89 (2258 kB)
* Checking if this processor honours the WP bit even in supervisor mode=
=2E.. Ok.
* SLUB: Genslabs=3D11, HWalign=3D64, Order=3D0-1, MinObjects=3D4, CPUs=3D=
4, Nodes=3D1
* hpet clockevent registered
* Calibrating delay using timer specific routine.. 5669.07 BogoMIPS (lp=
j=3D28345371)
* Security Framework initialized
* SELinux: Disabled at boot.
* AppArmor: AppArmor initialized
* Failure registering capabilities with primary security module.
* Mount-cache hash table entries: 512
* Initializing cgroup subsys ns
* Initializing cgroup subsys cpuacct
* CPU: After generic identify, caps: bfebfbff 20100000 00000000 0000000=
0 0408e3fd 00000000 00000001 00000000
* monitor/mwait feature present.
* using mwait in idle threads.
* CPU: L1 I cache: 32K, L1 D cache: 32K
* CPU: L2 cache: 6144K
* CPU: Physical Processor ID: 0
* CPU: Processor Core ID: 0
* CPU: After all inits, caps: bfebfbff 20100000 00000000 00043940 0408e=
3fd 00000000 00000001 00000000
* Compat vDSO mapped to ffffe000.
* Checking 'hlt' instruction... OK.
* SMP alternatives: switching to UP code
* Early unpacking initramfs... done
* ACPI: Core revision 20070126
* ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not foun=
d.
* CPU0: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 0a
* SMP alternatives: switching to SMP code
* Booting processor 1/1 eip 3000
* Initializing CPU#1
* Calibrating delay using timer specific routine.. 5666.00 BogoMIPS (lp=
j=3D28330022)
* CPU: After generic identify, caps: bfebfbff 20100000 00000000 0000000=
0 0408e3fd 00000000 00000001 00000000
* monitor/mwait feature present.
* CPU: L1 I cache: 32K, L1 D cache: 32K
* CPU: L2 cache: 6144K
* CPU: Physical Processor ID: 0
* CPU: Processor Core ID: 1
* CPU: After all inits, caps: bfebfbff 20100000 00000000 00043940 0408e=
3fd 00000000 00000001 00000000
* CPU1: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 0a
* SMP alternatives: switching to SMP code
* Booting processor 2/2 eip 3000
* Initializing CPU#2
* Calibrating delay using timer specific routine.. 5666.03 BogoMIPS (lp=
j=3D28330195)
* CPU: After generic identify, caps: bfebfbff 20100000 00000000 0000000=
0 0408e3fd 00000000 00000001 00000000
* monitor/mwait feature present.
* CPU: L1 I cache: 32K, L1 D cache: 32K
* CPU: L2 cache: 6144K
* CPU: Physical Processor ID: 0
* CPU: Processor Core ID: 2
* CPU: After all inits, caps: bfebfbff 20100000 00000000 00043940 0408e=
3fd 00000000 00000001 00000000
* CPU2: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 0a
* SMP alternatives: switching to SMP code
* Booting processor 3/3 eip 3000
* Initializing CPU#3
* Calibrating delay using timer specific routine.. 5666.05 BogoMIPS (lp=
j=3D28330266)
* CPU: After generic identify, caps: bfebfbff 20100000 00000000 0000000=
0 0408e3fd 00000000 00000001 00000000
* monitor/mwait feature present.
* CPU: L1 I cache: 32K, L1 D cache: 32K
* CPU: L2 cache: 6144K
* CPU: Physical Processor ID: 0
* CPU: Processor Core ID: 3
* CPU: After all inits, caps: bfebfbff 20100000 00000000 00043940 0408e=
3fd 00000000 00000001 00000000
* CPU3: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 0a
* Total of 4 processors activated (22667.17 BogoMIPS).
* ENABLING IO-APIC IRQs
* ..TIMER: vector=3D0x31 apic1=3D0 pin1=3D2 apic2=3D-1 pin2=3D-1
* checking TSC synchronization [CPU#0 -> CPU#1]: passed.
* checking TSC synchronization [CPU#0 -> CPU#2]: passed.
* checking TSC synchronization [CPU#0 -> CPU#3]: passed.
* Brought up 4 CPUs
* CPU0 attaching sched-domain:
* domain 0: span 03
* groups: 01 02
* domain 1: span 0f
* groups: 03 0c
* CPU1 attaching sched-domain:
* domain 0: span 03
* groups: 02 01
* domain 1: span 0f
* groups: 03 0c
* CPU2 attaching sched-domain:
* domain 0: span 0c
* groups: 04 08
* domain 1: span 0f
* groups: 0c 03
* CPU3 attaching sched-domain:
* domain 0: span 0c
* groups: 08 04
* domain 1: span 0f
* groups: 0c 03
* net_namespace: 64 bytes
* Booting paravirtualized kernel on bare hardware
* Time: 23:43:18 Date: 06/20/09
* NET: Registered protocol family 16
* EISA bus registered
* ACPI: bus type pci registered
* PCI: PCI BIOS revision 3.00 entry at 0xfb9e0, last bus=3D6
* PCI: Using configuration type 1
* Setting up standard PCI resources
* ACPI: EC: Look up EC in DSDT
* ACPI: Interpreter enabled
* ACPI: (supports S0 S3 S4 S5)
* ACPI: Using IOAPIC for interrupt routing
* ACPI: PCI Root Bridge [PCI0] (0000:00)
* PCI: Transparent bridge - 0000:00:1e.0
* ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
* ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
* ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
* ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
* ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
* ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
* ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
* ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
* ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
* ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
* ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
* ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
* ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
* ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
* Linux Plug and Play Support v0.97 (c) Adam Belay
* pnp: PnP ACPI init
* ACPI: bus type pnp registered
* pnpacpi: exceeded the max number of mem resources: 12
* pnp: PnP ACPI: found 14 devices
* ACPI: ACPI bus type pnp unregistered
* PnPBIOS: Disabled by ACPI PNP
* PCI: Using ACPI for IRQ routing
* PCI: If a device doesn't work, try "pci=3Drouteirq". If it helps, po=
st a report
* NET: Registered protocol family 8
* NET: Registered protocol family 20
* NetLabel: Initializing
* NetLabel: domain hash size =3D 128
* NetLabel: protocols =3D UNLABELED CIPSOv4
* NetLabel: unlabeled traffic allowed by default
* hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
* hpet0: 4 64-bit timers, 14318180 Hz
* AppArmor: AppArmor Filesystem Enabled
* Time: tsc clocksource has been installed.
* Switched to high resolution mode on CPU 0
* Switched to high resolution mode on CPU 3
* Switched to high resolution mode on CPU 1
* Switched to high resolution mode on CPU 2
* system 00:01: ioport range 0x4d0-0x4d1 has been reserved
* system 00:01: ioport range 0x290-0x29f has been reserved
* system 00:01: ioport range 0x800-0x805 has been reserved
* system 00:01: ioport range 0x290-0x294 has been reserved
* system 00:01: ioport range 0x880-0x88f has been reserved
* system 00:0a: ioport range 0x400-0x4cf has been reserved
* system 00:0a: ioport range 0x4d2-0x4ff has been reserved
* system 00:0b: iomem range 0xe0000000-0xe3ffffff could not be reserved
* system 00:0c: iomem range 0xd5000-0xd7fff has been reserved
* system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved
* system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
* system 00:0c: iomem range 0xfc000-0xfffff could not be reserved
* system 00:0c: iomem range 0xcfeb0000-0xcfefffff could not be reserved
* system 00:0c: iomem range 0x0-0x9ffff could not be reserved
* system 00:0c: iomem range 0x100000-0xcfeaffff could not be reserved
* system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
* system 00:0c: iomem range 0xfed10000-0xfed1dfff could not be reserved
* system 00:0c: iomem range 0xfed20000-0xfed8ffff could not be reserved
* system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved
* system 00:0c: iomem range 0xffb00000-0xffb7ffff could not be reserved
* PCI: Bridge: 0000:00:01.0
* IO window: 9000-9fff
* MEM window: e4000000-e7ffffff
* PREFETCH window: d0000000-dfffffff
* PCI: Bridge: 0000:00:1c.0
* IO window: disabled.
* MEM window: disabled.
* PREFETCH window: disabled.
* PCI: Bridge: 0000:00:1c.3
* IO window: a000-afff
* MEM window: ea100000-ea1fffff
* PREFETCH window: disabled.
* PCI: Bridge: 0000:00:1c.4
* IO window: b000-bfff
* MEM window: e8000000-e8ffffff
* PREFETCH window: ea000000-ea0fffff
* PCI: Bridge: 0000:00:1c.5
* IO window: c000-cfff
* MEM window: e9000000-e9ffffff
* PREFETCH window: ea200000-ea2fffff
* PCI: Bridge: 0000:00:1e.0
* IO window: d000-dfff
* MEM window: ea300000-ea3fffff
* PREFETCH window: disabled.
* ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
* PCI: Setting latency timer of device 0000:00:01.0 to 64
* ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
* PCI: Setting latency timer of device 0000:00:1c.0 to 64
* ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 17
* PCI: Setting latency timer of device 0000:00:1c.3 to 64
* ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
* PCI: Setting latency timer of device 0000:00:1c.4 to 64
* ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 18
* PCI: Setting latency timer of device 0000:00:1c.5 to 64
* PCI: Setting latency timer of device 0000:00:1e.0 to 64
* NET: Registered protocol family 2
* IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
* TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
* TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
* TCP: Hash tables configured (established 131072 bind 65536)
* TCP reno registered
* checking if image is initramfs... it is
* Freeing initrd memory: 7342k freed
* audit: initializing netlink socket (disabled)
* audit(1245541398.743:1): initialized
* highmem bounce pool size: 64 pages
* Total HugeTLB memory allocated, 0
* VFS: Disk quotas dquot_6.5.1
* Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
* io scheduler noop registered
* io scheduler anticipatory registered
* io scheduler deadline registered (default)
* io scheduler cfq registered
* Boot video device is 0000:01:00.0
* PCI: Setting latency timer of device 0000:00:01.0 to 64
* assign_interrupt_mode Found MSI capability
* Allocate Port Service[0000:00:01.0:pcie00]
* PCI: Setting latency timer of device 0000:00:1c.0 to 64
* assign_interrupt_mode Found MSI capability
* Allocate Port Service[0000:00:1c.0:pcie00]
* Allocate Port Service[0000:00:1c.0:pcie02]
* PCI: Setting latency timer of device 0000:00:1c.3 to 64
* assign_interrupt_mode Found MSI capability
* Allocate Port Service[0000:00:1c.3:pcie00]
* Allocate Port Service[0000:00:1c.3:pcie02]
* PCI: Setting latency timer of device 0000:00:1c.4 to 64
* assign_interrupt_mode Found MSI capability
* Allocate Port Service[0000:00:1c.4:pcie00]
* Allocate Port Service[0000:00:1c.4:pcie02]
* PCI: Setting latency timer of device 0000:00:1c.5 to 64
* assign_interrupt_mode Found MSI capability
* Allocate Port Service[0000:00:1c.5:pcie00]
* Allocate Port Service[0000:00:1c.5:pcie02]
* isapnp: Scanning for PnP cards...
* isapnp: No Plug & Play device found
* Real Time Clock Driver v1.12ac
* hpet_resources: 0xfed00000 is busy
* Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enab=
led
* RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksiz=
e
* input: Macintosh mouse button emulation as /devices/virtual/input/inp=
ut0
* PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,1=
2
* serio: i8042 KBD port at 0x60,0x64 irq 1
* serio: i8042 AUX port at 0x60,0x64 irq 12
* mice: PS/2 mouse device common for all mice
* EISA: Probing bus 0 at eisa.0
* EISA: Detected 0 cards.
* cpuidle: using governor ladder
* cpuidle: using governor menu
* NET: Registered protocol family 1
* Using IPI No-Shortcut mode
* registered taskstats version 1
* Magic number: 13:627:757
* BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
* Freeing unused kernel memory: 384k freed
* Write protecting the kernel read-only data: 828k
* input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0=
/input/input1
* vesafb: framebuffer at 0xe5000000, mapped to 0xf8880000, using 14336k=
, total 14336k
* vesafb: mode is 1600x1200x32, linelength=3D6400, pages=3D1
* vesafb: protected mode interface info at c000:c360
* vesafb: pmi: set display start =3D c00cc3c3, set palette =3D c00cc41e
* vesafb: pmi: ports =3D 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3c=
c 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da=20
* vesafb: scrolling: redraw
* vesafb: Truecolor: size=3D8:8:8:8, shift=3D24:16:8:0
* Console: switching to colour frame buffer device 200x75
* fb0: VESA VGA frame buffer device
* fuse init (API version 7.9)
* ACPI: SSDT CFEE7F10, 022A (r1 PmRef Cpu0Ist 3000 INTL 20040311)
* ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
* ACPI: Processor [CPU0] (supports 8 throttling states)
* ACPI: SSDT CFEE83D0, 0152 (r1 PmRef Cpu1Ist 3000 INTL 20040311)
* ACPI: CPU3 (power states: C1[C1] C2[C2] C3[C3])
* ACPI: Processor [CPU1] (supports 8 throttling states)
* ACPI: SSDT CFEE8530, 0152 (r1 PmRef Cpu2Ist 3000 INTL 20040311)
* ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
* ACPI: Processor [CPU2] (supports 8 throttling states)
* ACPI: SSDT CFEE8690, 0152 (r1 PmRef Cpu3Ist 3000 INTL 20040311)
* ACPI: CPU2 (power states: C1[C1] C2[C2] C3[C3])
* ACPI: Processor [CPU3] (supports 8 throttling states)
* usbcore: registered new interface driver usbfs
* usbcore: registered new interface driver hub
* usbcore: registered new device driver usb
* USB Universal Host Controller Interface driver v3.0
* ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
* PCI: Setting latency timer of device 0000:00:1a.0 to 64
* uhci_hcd 0000:00:1a.0: UHCI Host Controller
* uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
* uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e500
* usb usb1: configuration #1 chosen from 1 choice
* hub 1-0:1.0: USB hub found
* hub 1-0:1.0: 2 ports detected
* SCSI subsystem initialized
* libata version 3.00 loaded.
* ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 19
* PCI: Setting latency timer of device 0000:00:1a.1 to 64
* uhci_hcd 0000:00:1a.1: UHCI Host Controller
* uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
* uhci_hcd 0000:00:1a.1: irq 19, io base 0x0000e000
* usb usb2: configuration #1 chosen from 1 choice
* hub 2-0:1.0: USB hub found
* hub 2-0:1.0: 2 ports detected
* ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 20
* PCI: Setting latency timer of device 0000:00:1a.2 to 64
* uhci_hcd 0000:00:1a.2: UHCI Host Controller
* uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
* uhci_hcd 0000:00:1a.2: irq 20, io base 0x0000e100
* usb usb3: configuration #1 chosen from 1 choice
* hub 3-0:1.0: USB hub found
* hub 3-0:1.0: 2 ports detected
* ahci 0000:00:1f.2: version 3.0
* ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 17
* usb 2-1: new full speed USB device using uhci_hcd and address 2
* usb 2-1: configuration #1 chosen from 1 choice
* ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl S=
ATA mode
* ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum=
part=20
* PCI: Setting latency timer of device 0000:00:1f.2 to 64
* scsi0 : ahci
* scsi1 : ahci
* scsi2 : ahci
* scsi3 : ahci
* scsi4 : ahci
* scsi5 : ahci
* ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status change=
d
* ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status change=
d
* ata3: SATA max UDMA/133 abar ***@0xea406000 port 0xea406200 irq 218
* ata4: SATA max UDMA/133 abar ***@0xea406000 port 0xea406280 irq 218
* ata5: SATA max UDMA/133 abar ***@0xea406000 port 0xea406300 irq 218
* ata6: SATA max UDMA/133 abar ***@0xea406000 port 0xea406380 irq 218
* ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
* ata1.00: ATA-8: ST3640323AS, SD35, max UDMA/133
* ata1.00: 1250263728 sectors, multi 0: LBA48 NCQ (depth 31/32)
* ata1.00: configured for UDMA/133
* ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
* ata2.00: ATA-8: WDC WD1001FALS-00J7B1, 05.00K05, max UDMA/133
* ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
* ata2.00: configured for UDMA/133
* ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
* ata3.00: ATAPI: HL-DT-STDVD-RAM GH22NS30, 1.01, max UDMA/100
* ata3.00: configured for UDMA/100
* ata4: SATA link down (SStatus 0 SControl 300)
* ata5: SATA link down (SStatus 0 SControl 300)
* ata6: SATA link down (SStatus 0 SControl 300)
* scsi 0:0:0:0: Direct-Access ATA ST3640323AS SD35 PQ: 0 =
ANSI: 5
* scsi 1:0:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 =
ANSI: 5
* scsi 2:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NS30 1.01 PQ: 0 =
ANSI: 5
* ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, low) -> IRQ 17
* ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SA=
TA mode
* ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part=20
* PCI: Setting latency timer of device 0000:03:00.0 to 64
* scsi6 : ahci
* scsi7 : ahci
* ata7: SATA max UDMA/133 abar ***@0xea100000 port 0xea100100 irq 17
* ata8: SATA max UDMA/133 abar ***@0xea100000 port 0xea100180 irq 17
* ata7: SATA link down (SStatus 0 SControl 300)
* ata8: SATA link down (SStatus 0 SControl 300)
* ACPI: PCI Interrupt 0000:06:07.0[A] -> ACPI: PCI Interrupt 0000:00:1a=
=2E7[C] -> GSI 18 (level, low) -> IRQ 20
* PCI: Setting latency timer of device 0000:00:1a.7 to 64
* ehci_hcd 0000:00:1a.7: EHCI Host Controller
* ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 4
* PCI: cache line size of 32 is not supported by device 0000:00:1a.7
* ehci_hcd 0000:00:1a.7: irq 20, io mem 0xea405000
* ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
* usb usb4: configuration #1 chosen from 1 choice
* hub 4-0:1.0: USB hub found
* hub 4-0:1.0: 6 ports detected
* GSI 23 (level, low) -> IRQ 21
* ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=3D[21] MMIO=3D[ea344000=
-ea3447ff] Max Packet=3D[2048] IR/IT contexts=3D[4/8]
* Driver 'sd' needs updating - please use bus_type methods
* ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21
* PCI: Setting latency timer of device 0000:00:1d.7 to 64
* ehci_hcd 0000:00:1d.7: EHCI Host Controller
* ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
* PCI: cache line size of 32 is not supported by device 0000:00:1d.7
* ehci_hcd 0000:00:1d.7: irq 21, io mem 0xea404000
* ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
* usb usb5: configuration #1 chosen from 1 choice
* hub 5-0:1.0: USB hub found
* hub 5-0:1.0: 6 ports detected
* sd 0:0:0:0: [sda] 1250263728 512-byte hardware sectors (640135 MB)
* sd 0:0:0:0: [sda] Write Protect is off
* sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
* sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't =
support DPO or FUA
* ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21
* ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 16 (level, low) -> IRQ 16
* PCI: Setting latency timer of device 0000:00:1d.0 to 64
* uhci_hcd 0000:00:1d.0: UHCI Host Controller
* uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
* PCI: Setting latency timer of device 0000:03:00.1 to 64
* ACPI: PCI interrupt for device 0000:03:00.1 disabled
* uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000e200
* usb usb6: configuration #1 chosen from 1 choice
* hub 6-0:1.0: USB hub found
* hub 6-0:1.0: 2 ports detected
* sd 0:0:0:0: [sda] 1250263728 512-byte hardware sectors (640135 MB)
* sd 0:0:0:0: [sda] Write Protect is off
* Driver 'sr' needs updating - please use bus_type methods
* ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
* PCI: Setting latency timer of device 0000:00:1d.1 to 64
* uhci_hcd 0000:00:1d.1: UHCI Host Controller
* uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
* uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e300
* usb usb7: configuration #1 chosen from 1 choice
* hub 7-0:1.0: USB hub found
* hub 7-0:1.0: 2 ports detected
* sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
* usb 4-3: new high speed USB device using ehci_hcd and address 2
* sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't =
support DPO or FUA
* sda:ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IR=
Q 20
* sda1PCI: Setting latency timer of device 0000:00:1d.2 to 64
* uhci_hcd 0000:00:1d.2: UHCI Host Controller
* uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
* uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000e400
* usb usb8: configuration #1 chosen from 1 choice
* hub 8-0:1.0: USB hub found
* hub 8-0:1.0: 2 ports detected
* sda2 <r8169 Gigabit Ethernet driver 2.2LK loaded
* ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16
* sda5>
* PCI: Setting latency timer of device 0000:04:00.0 to 64
* sd 0:0:0:0: [sda] Attached SCSI disk
* eth0: RTL8168c/8111c at 0xf8836000, 00:1f:d0:d5:14:97, XID 3c4000c0 I=
RQ 217
* r8169 Gigabit Ethernet driver 2.2LK loaded
* ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 17 (level, low) -> IRQ 18
* PCI: Setting latency timer of device 0000:05:00.0 to 64
* eth1: RTL8168c/8111c at 0xf9708000, 00:1f:d0:81:2d:a3, XID 3c4000c0 I=
RQ 216
* ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 16 (level, low) -> IRQ 16
* PCI: Setting latency timer of device 0000:03:00.1 to 64
* scsi8 : pata_jmicron
* scsi9 : pata_jmicron
* ata9: PATA max UDMA/100 cmd 0xa000 ctl 0xa100 bmdma 0xa400 irq 16
* ata10: PATA max UDMA/100 cmd 0xa200 ctl 0xa300 bmdma 0xa408 irq 16
* sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB)
* usb 4-3: configuration #1 chosen from 1 choice
* sd 1:0:0:0: [sdb] Write Protect is off
* sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
* sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't =
support DPO or FUA
* sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB)
* sd 1:0:0:0: [sdb] Write Protect is off
* sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
* sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't =
support DPO or FUA
* sdb: sdb1
* sd 1:0:0:0: [sdb] Attached SCSI disk
* usb 2-1: USB disconnect, address 2
* sr0: scsi3-mmc drive: 40x/48x writer dvd-ram cd/rw xa/form2 cdda tray
* Uniform CD-ROM driver Revision: 3.20
* sr 2:0:0:0: Attached scsi CD-ROM sr0
* sd 0:0:0:0: Attached scsi generic sg0 type 0
* sd 1:0:0:0: Attached scsi generic sg1 type 0
* sr 2:0:0:0: Attached scsi generic sg2 type 5
* ieee1394: Host added: ID:BUS[0-00:1023] GUID[00ee5c5400001fd0]
* Attempting manual resume
* swsusp: Resume From Partition 8:5
* PM: Checking swsusp image.
* PM: Resume from disk failed.
* kjournald starting. Commit interval 5 seconds
* EXT3-fs: mounted filesystem with ordered data mode.
* input: PC Speaker as /devices/platform/pcspkr/input/input2
* pci_hotplug: PCI Hot Plug PCI Core version: 0.5
* input: Power Button (FF) as /devices/virtual/input/input3
* shpchp: Unknown symbol acpi_run_oshp
* shpchp: Unknown symbol pci_hp_change_slot_info
* shpchp: Unknown symbol pci_hp_register
* shpchp: Unknown symbol pci_hp_deregister
* shpchp: Unknown symbol acpi_get_hp_params_from_firmware
* shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
* r8169: eth0: link up
* r8169: eth0: link up
* r8169: eth1: link up
* r8169: eth1: link up
* Linux agpgart interface v0.102
* ACPI: Power Button (FF) [PWRF]
* input: Power Button (CM) as /devices/virtual/input/input4
* ACPI: Power Button (CM) [PWRB]
* input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/ser=
io1/input/input5
* parport_pc 00:07: reported by Plug and Play ACPI
* parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
* nvidia: module license 'NVIDIA' taints kernel.
* ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
* PCI: Setting latency timer of device 0000:01:00.0 to 64
* NVRM: loading NVIDIA UNIX x86 Kernel Module 185.18.14 Wed May 27 02=
:23:13 PDT 2009
* Linux video capture interface: v2.00
* NET: Registered protocol family 10
* lo: Disabled Privacy Extensions
* ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 19 (level, low) -> IRQ 17
* parport1: PC-style at 0xd400 [PCSPP,TRISTATE,EPP]
* 0000:06:01.0: ttyS0 at I/O 0xd200 (irq =3D 17) is a 16550A
* 0000:06:01.0: ttyS1 at I/O 0xd300 (irq =3D 17) is a 16550A
* em28xx: New device Pinnacle Systems PCTV 800e @ 480 Mbps (2304:0227, =
interface 0, class 0)
* em28xx #0: Identified as Pinnacle PCTV HD Pro Stick (card=3D17)
* em28xx #0: chip ID is em2882/em2883
* ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
* PCI: Setting latency timer of device 0000:00:1b.0 to 64
* em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 27 02 d0 12 5c 03 8e 16 a=
4 1c
* em28xx #0: i2c eeprom 10: 6a 24 27 57 46 07 01 00 00 00 00 00 00 00 0=
0 00
* em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b 1c 0=
0 00
* em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 0=
0 00
* em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0=
0 00
* em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0=
0 00
* em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 24 03 50 00 6=
9 00
* em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 5=
3 00
* em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 00 00 1=
6 03
* em28xx #0: i2c eeprom 90: 50 00 43 00 54 00 56 00 20 00 38 00 30 00 3=
0 00
* em28xx #0: i2c eeprom a0: 65 00 00 00 1c 03 30 00 36 00 31 00 30 00 3=
0 00
* em28xx #0: i2c eeprom b0: 31 00 30 00 33 00 39 00 34 00 34 00 32 00 0=
0 00
* em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0=
0 00
* em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0=
0 00
* em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0=
0 00
* em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0=
0 00
* em28xx #0: EEPROM ID=3D 0x9567eb1a, EEPROM hash =3D 0x2de5abbf
* em28xx #0: EEPROM info:
* em28xx #0: AC97 audio (5 sample rates)
* em28xx #0: 500mA max power
* em28xx #0: Table at 0x27, strings=3D0x168e, 0x1ca4, 0x246a
* hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
* input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1a.7/usb4=
/4-3/input/input6
* ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 20 (level, low) -> IRQ 23
* Vortex: init.... em28xx #0: Config register raw data: 0xd0
* em28xx #0: AC97 vendor ID =3D 0xffffffff
* em28xx #0: AC97 features =3D 0x6a90
* em28xx #0: Empia 202 AC97 audio processor detected
* em28xx #0: v4l2 driver version 0.1.2
* em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
* usbcore: registered new interface driver em28xx
* em28xx driver loaded
* xc2028 0-0061: creating new instance
* xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
* em28xx #0/2: xc3028 attached
* DVB: registering new adapter (em28xx #0)
* DVB: registering adapter 0 frontend 0 (LG Electronics LGDT3303 VSB/QA=
M Frontend)...
* Successfully loaded em28xx-dvb
* Em28xx: Initialized (Em28xx dvb Extension) extension
* done.
* gameport: AU88x0 Gameport is pci0000:06:00.0/gameport0, speed 596kHz
* loop: module loaded
* lp0: using parport0 (interrupt-driven).
* lp1: using parport1 (polling).
* it87: Found IT8718F chip at 0x290, revision 5
* it87: in3 is VCC (+5V)
* Adding 9863868k swap on /dev/sda5. Priority:-1 extents:1 across:9863=
868k
* EXT3 FS on sda1, internal journal
* kjournald starting. Commit interval 5 seconds
* EXT3 FS on sdb1, internal journal
* EXT3-fs: mounted filesystem with ordered data mode.
* ip_tables: (C) 2000-2006 Netfilter Core Team
* nf_conntrack version 0.5.0 (16384 buckets, 65536 max)

_________________________________________________________________
Lauren found her dream laptop. Find the PC that=92s right for you.
http://www.microsoft.com/windows/choosepc/?ocid=3Dftp_val_wl_290--
To unsubscribe from this list: send the line "unsubscribe linux-media" =
in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Devin Heitmueller
2009-06-21 21:29:27 UTC
Permalink
<snip>

George,

It will definitely be interesting to see if the device works under
Windows. It is very interesting that the tvp5150 driver isn't being
loaded at all, nor the xc3028 during analog initialization (and as a
result the DVB won't work because the analog initialization sets the
firmware to be used).

We've got the exact same USB device ids and last night I confirmed the
board is working fine here with the latest tree, suggesting no
regression in the driver code.

Did you happen to configure for only a subset of drivers to be
compiled? Or did you just do a checkout and "cd v4l-dvb", "make",
"make install", reboot?

Devin
--
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com
George Adams
2009-06-22 21:39:45 UTC
Permalink
Hello again. I have some updates now that I've been able to make some =
further tests.

1) My Pinnacle PCTV HD Pro (800e) stick does, in fact, work correctly u=
nder Windows. The scanning detects the one channel we're running over =
our closed circuit cable (channel 3) and displays it on-screen just fin=
e. (audio over channel 3 works as well)


2) Devin, my installation process is "hg clone http://linuxtv.org/hg/v4=
l-dvb; cd v4l-dvb; make rminstall; make distclean; make; make install" =
This appears to install everything v4l-related as modules in the appro=
uname -r
2.6.24-24-server
find /lib/modules/`uname -r` -type f -name em28xx\* -o -name tvp\*
/lib/modules/2.6.24-24-server/kernel/drivers/media/video/tvp5150.ko
/lib/modules/2.6.24-24-server/kernel/drivers/media/video/em28xx/em28xx.=
ko
/lib/modules/2.6.24-24-server/kernel/drivers/media/video/em28xx/em28xx-=
dvb.ko


3) tvtime still hangs when launched. =20


4) Running zapping gives the error "VBI Initialization failed. /dev/vb=
i0 (Pinnacle PCTV HD Pro) is not a raw vbi device)". Continuing on and=
trying to choose the "Preferences" menu option segfaults the program (=
and this is the Ubuntu-distributed "zapping" package)
mplayer -vo xv tv:// -tv driver=3Dv4l2:alsa:immediatemode=3D0:adevice=
=3Dhw.1,0:norm=3Dntsc:chanlist=3Dus-cable:channel=3D3

MPlayer 1.0rc2-4.2.4 (C) 2000-2007 MPlayer Team
CPU: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz (Family: 6, Model:=
23, Stepping: 10)
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled with runtime CPU detection.
mplayer: could not connect to socket
mplayer: No such file or directory
=46ailed to open LIRC support. You will not be able to use your remote =
control.

Playing tv://.
TV file format detected.
Selected driver: v4l2
name: Video 4 Linux 2 input
author: Martin Olschewski=20
comment: first try, more to come ;-)
Selected device: Pinnacle PCTV HD Pro Stick
Tuner cap:
Tuner rxs:
Capabilites: video capture tuner audio read/write streaming
supported norms: 0 =3D NTSC; 1 =3D NTSC-M; 2 =3D NTSC-M-JP; 3 =3D NTSC=
-M-KR; 4 =3D NTSC-443; 5 =3D PAL; 6 =3D PAL-BG; 7 =3D PAL-H; 8 =3D PAL-=
I; 9 =3D PAL-DK; 10 =3D PAL-M; 11 =3D PAL-N; 12 =3D PAL-Nc; 13 =3D PAL-=
60; 14 =3D SECAM;
inputs: 0 =3D Television; 1 =3D Composite1; 2 =3D S-Video;
Current input: 0
Current format: YUYV
v4l2: current audio mode is : MONO
v4l2: ioctl set format failed: Invalid argument
v4l2: ioctl set format failed: Invalid argument
v4l2: ioctl set format failed: Invalid argument
Selected channel: 3 (freq: 61.250)
Video buffer shorter than 3 times audio frame duration.
You will probably experience heavy framedrops.
v4l2: ioctl query control failed: Invalid argument
v4l2: ioctl query control failed: Invalid argument
v4l2: ioctl query control failed: Invalid argument
v4l2: ioctl query control failed: Invalid argument
xscreensaver_disable: Could not find XScreenSaver window.
GNOME screensaver disabled
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D
Opening video decoder: [raw] RAW Uncompressed Video
VDec: vo config request - 640 x 480 (preferred colorspace: Packed YUY2)
VDec: using Packed YUY2 as output csp (no 0)
Movie-Aspect is undefined - no prescaling applied.
VO: [xv] 640x480 =3D> 640x480 Packed YUY2
Selected video codec: [rawyuy2] vfm: raw (RAW YUY2)
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D
=46orced audio codec: mad
Opening audio decoder: [pcm] Uncompressed PCM audio decoder
AUDIO: 44100 Hz, 1 ch, s16le, 705.6 kbit/100.00% (ratio: 88200->88200)
Selected audio codec: [pcm] afm: pcm (Uncompressed PCM)
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D
AO: [pulse] 44100Hz 1ch s16le (2 bytes per sample)
Starting playback...
v4l2: select timeout
A: 0.5 V: 0.0 A-V: 0.472 ct: 0.000 1/ 1 ??% ??% ??,?% 1 0 [[JM=
A: 0.9 V: 0.0 A-V: 0.940 ct: 0.003 2/ 2 ??% ??% ??,?% 2 0 [[JM=
v4l2: select timeout
A: 1.5 V: 0.0 A-V: 1.479 ct: 0.007 3/ 3 ??% ??% ??,?% 3 0 [[JM=
A: 2.0 V: 0.0 A-V: 1.981 ct: 0.010 4/ 4 ??% ??% ??,?% 4 0 [[JM=
v4l2: select timeout
A: 2.5 V: 0.0 A-V: 2.485 ct: 0.013 5/ 5 ??% ??% ??,?% 5 0 [[JM=
A: 3.0 V: 0.0 A-V: 2.957 ct: 0.017 6/ 6 ??% ??% ??,?% 6 0 [[JM=
v4l2: select timeout
A: 3.5 V: 0.0 A-V: 3.460 ct: 0.020 7/ 7 ??% ??% ??,?% 7 0 [[JM=
A: 4.0 V: 0.0 A-V: 3.956 ct: 0.022 8/ 8 ??% ??% ??,?% 8 0 [[JM=
v4l2: select timeout
A: 4.5 V: 0.0 A-V: 4.460 ct: 0.025 9/ 9 ??% ??% ??,?% 9 0 [[JM=
A: 5.0 V: 0.0 A-V: 4.956 ct: 0.027 10/ 10 ??% ??% ??,?% 10 0 [[J=
Mv4l2: select timeout


The Mplayer screen itself remains green the whole time.


So the surprise to me is that the Pinnacle device is not actually broke=
n. By this point, I had been sure it was a hardware problem. Now I re=
alize that it's something else. And so I would again appreciate any su=
ggestions you might have. Thank you once again!

(My installation process, just for reference, distilled down:)
cd /usr/local/src
hg clone http://linuxtv.org/hg/v4l-dvb
cd v4l-dvb
make rminstall; make distclean; make; make install
cd /tmp
wget http://www.steventoth.net/linux/xc5000/HVR-12x0-14x0-17x0_1_25_2=
5271_WHQL.zip
unzip -j HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip Driver85/hcw85bda.sys
perl /usr/local/src/v4l-dvb/linux/Documentation/video4linux/extract_x=
c3028.pl
mv xc3028-v27.fw /lib/firmware/xc3028-v27.fw
_________________________________________________________________
Hotmail=AE has ever-growing storage! Don=92t worry about storage limits=
=2E
http://windowslive.com/Tutorial/Hotmail/Storage?ocid=3DTXT_TAGLM_WL_HM_=
Tutorial_Storage_062009--
To unsubscribe from this list: send the line "unsubscribe linux-media" =
in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
George Adams
2009-06-22 21:46:16 UTC
Permalink
Oh, and in case it's useful, here are my video modules before plugging =
in the Pinnacle device...
lsmod | grep vid
video 19856 0
output 4736 1 video
hwmon_vid 4352 1 it87
nvidia 9555940 0
agpgart 34760 1 nvidia
i2c_core 24832 1 nvidia

=2E.. and after plugging it in
lsmod | grep vid
videodev 40864 4 tuner,tvp5150,em28xx,v4l2_common
v4l1_compat 14852 1 videodev
videobuf_vmalloc 8324 1 em28xx
videobuf_core 19716 2 em28xx,videobuf_vmalloc
video 19856 0
output 4736 1 video
hwmon_vid 4352 1 it87
nvidia 9555940 0
agpgart 34760 1 nvidia
i2c_core 24832 8 tuner_xc2028,lgdt330x,tuner,tvp5150,em2=
8xx,v4l2_common,tveeprom,nvidia
dmesg
[ 115.185132] usb 7-1: new high speed USB device using ehci_hcd and ad=
dress 2
[ 115.339403] usb 7-1: configuration #1 chosen from 1 choice
[ 115.433546] Linux video capture interface: v2.00
[ 115.514652] em28xx: New device Pinnacle Systems PCTV 800e @ 480 Mbps=
(2304:0227, interface 0, class 0)
[ 115.514658] em28xx #0: Identified as Pinnacle PCTV HD Pro Stick (car=
d=3D17)
[ 115.514729] em28xx #0: chip ID is em2882/em2883
[ 115.733205] em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 27 02 d0 12 =
5c 03 8e 16 a4 1c
[ 115.733215] em28xx #0: i2c eeprom 10: 6a 24 27 57 46 07 01 00 00 00 =
00 00 00 00 00 00
[ 115.733236] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 =
00 00 5b 1c 00 00
[ 115.733243] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 =
00 00 00 00 00 00
[ 115.733249] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 =
00 00 00 00 00 00
[ 115.733255] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 =
00 00 00 00 00 00
[ 115.733262] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 =
24 03 50 00 69 00
[ 115.733268] em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 =
65 00 20 00 53 00
[ 115.733274] em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 =
73 00 00 00 16 03
[ 115.733280] em28xx #0: i2c eeprom 90: 50 00 43 00 54 00 56 00 20 00 =
38 00 30 00 30 00
[ 115.733287] em28xx #0: i2c eeprom a0: 65 00 00 00 1c 03 30 00 36 00 =
31 00 30 00 30 00
[ 115.733294] em28xx #0: i2c eeprom b0: 31 00 30 00 33 00 39 00 34 00 =
34 00 32 00 00 00
[ 115.733382] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 =
00 00 00 00 00 00
[ 115.733388] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 =
00 00 00 00 00 00
[ 115.733394] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 =
00 00 00 00 00 00
[ 115.733400] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 =
00 00 00 00 00 00
[ 115.733407] em28xx #0: EEPROM ID=3D 0x9567eb1a, EEPROM hash =3D 0x2d=
e5abbf
[ 115.733409] em28xx #0: EEPROM info:
[ 115.733410] em28xx #0: AC97 audio (5 sample rates)
[ 115.733411] em28xx #0: 500mA max power
[ 115.733413] em28xx #0: Table at 0x27, strings=3D0x168e, 0x1ca4=
, 0x246a
[ 115.746503] input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000=
:00:1a.7/usb7/7-1/input/input6
[ 115.864417] em28xx #0: Config register raw data: 0xd0
[ 115.865164] em28xx #0: AC97 vendor ID =3D 0xffffffff
[ 115.865540] em28xx #0: AC97 features =3D 0x6a90
[ 115.865544] em28xx #0: Empia 202 AC97 audio processor detected
[ 115.955428] em28xx #0: v4l2 driver version 0.1.2
[ 116.037113] em28xx #0: V4L2 device registered as /dev/video0 and /de=
v/vbi0
[ 116.037129] usbcore: registered new interface driver em28xx
[ 116.037133] em28xx driver loaded
[ 116.374776] xc2028 0-0061: creating new instance
[ 116.374780] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
[ 116.374782] em28xx #0/2: xc3028 attached
[ 116.374784] DVB: registering new adapter (em28xx #0)
[ 116.374786] DVB: registering adapter 0 frontend 0 (LG Electronics LG=
DT3303 VSB/QAM Frontend)...
[ 116.374943] Successfully loaded em28xx-dvb
[ 116.374945] Em28xx: Initialized (Em28xx dvb Extension) extension


----------------------------------------
Subject: RE: Can't use my Pinnacle PCTV HD Pro stick - what am I doin=
g wrong?
Date: Mon, 22 Jun 2009 17:39:45 -0400
Hello again. I have some updates now that I've been able to make some=
further tests.
1) My Pinnacle PCTV HD Pro (800e) stick does, in fact, work correctly=
under Windows. The scanning detects the one channel we're running over=
our closed circuit cable (channel 3) and displays it on-screen just fi=
ne. (audio over channel 3 works as well)
2) Devin, my installation process is "hg clone http://linuxtv.org/hg/=
v4l-dvb; cd v4l-dvb; make rminstall; make distclean; make; make install=
" This appears to install everything v4l-related as modules in the appr=
uname -r
2.6.24-24-server
find /lib/modules/`uname -r` -type f -name em28xx\* -o -name tvp\*
/lib/modules/2.6.24-24-server/kernel/drivers/media/video/tvp5150.ko
/lib/modules/2.6.24-24-server/kernel/drivers/media/video/em28xx/em28x=
x.ko
/lib/modules/2.6.24-24-server/kernel/drivers/media/video/em28xx/em28x=
x-dvb.ko
3) tvtime still hangs when launched.
4) Running zapping gives the error "VBI Initialization failed. /dev/v=
bi0 (Pinnacle PCTV HD Pro) is not a raw vbi device)". Continuing on and=
trying to choose the "Preferences" menu option segfaults the program (=
and this is the Ubuntu-distributed "zapping" package)
mplayer -vo xv tv:// -tv driver=3Dv4l2:alsa:immediatemode=3D0:adevic=
e=3Dhw.1,0:norm=3Dntsc:chanlist=3Dus-cable:channel=3D3
MPlayer 1.0rc2-4.2.4 (C) 2000-2007 MPlayer Team
3, Stepping: 10)
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled with runtime CPU detection.
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote =
control.
Playing tv://.
TV file format detected.
Selected driver: v4l2
name: Video 4 Linux 2 input
author: Martin Olschewski
comment: first try, more to come ;-)
Selected device: Pinnacle PCTV HD Pro Stick
Capabilites: video capture tuner audio read/write streaming
supported norms: 0 =3D NTSC; 1 =3D NTSC-M; 2 =3D NTSC-M-JP; 3 =3D NTS=
C-M-KR; 4 =3D NTSC-443; 5 =3D PAL; 6 =3D PAL-BG; 7 =3D PAL-H; 8 =3D PAL=
-I; 9 =3D PAL-DK; 10 =3D PAL-M; 11 =3D PAL-N; 12 =3D PAL-Nc; 13 =3D PAL=
-60; 14 =3D SECAM;
inputs: 0 =3D Television; 1 =3D Composite1; 2 =3D S-Video;
Current input: 0
Current format: YUYV
v4l2: current audio mode is : MONO
v4l2: ioctl set format failed: Invalid argument
v4l2: ioctl set format failed: Invalid argument
v4l2: ioctl set format failed: Invalid argument
Selected channel: 3 (freq: 61.250)
Video buffer shorter than 3 times audio frame duration.
You will probably experience heavy framedrops.
v4l2: ioctl query control failed: Invalid argument
v4l2: ioctl query control failed: Invalid argument
v4l2: ioctl query control failed: Invalid argument
v4l2: ioctl query control failed: Invalid argument
xscreensaver_disable: Could not find XScreenSaver window.
GNOME screensaver disabled
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D
Opening video decoder: [raw] RAW Uncompressed Video
VDec: vo config request - 640 x 480 (preferred colorspace: Packed YUY=
2)
VDec: using Packed YUY2 as output csp (no 0)
Movie-Aspect is undefined - no prescaling applied.
VO: [xv] 640x480 =3D> 640x480 Packed YUY2
Selected video codec: [rawyuy2] vfm: raw (RAW YUY2)
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D
Forced audio codec: mad
Opening audio decoder: [pcm] Uncompressed PCM audio decoder
AUDIO: 44100 Hz, 1 ch, s16le, 705.6 kbit/100.00% (ratio: 88200->88200=
)
Selected audio codec: [pcm] afm: pcm (Uncompressed PCM)
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D
AO: [pulse] 44100Hz 1ch s16le (2 bytes per sample)
Starting playback...
v4l2: select timeout
A: 0.5 V: 0.0 A-V: 0.472 ct: 0.000 1/ 1 ??% ??% ??,?% 1 0 [[JMA: 0.9 =
V: 0.0 A-V: 0.940 ct: 0.003 2/ 2 ??% ??% ??,?% 2 0 [[JMv4l2: select tim=
eout
A: 1.5 V: 0.0 A-V: 1.479 ct: 0.007 3/ 3 ??% ??% ??,?% 3 0 [[JMA: 2.0 =
V: 0.0 A-V: 1.981 ct: 0.010 4/ 4 ??% ??% ??,?% 4 0 [[JMv4l2: select tim=
eout
A: 2.5 V: 0.0 A-V: 2.485 ct: 0.013 5/ 5 ??% ??% ??,?% 5 0 [[JMA: 3.0 =
V: 0.0 A-V: 2.957 ct: 0.017 6/ 6 ??% ??% ??,?% 6 0 [[JMv4l2: select tim=
eout
A: 3.5 V: 0.0 A-V: 3.460 ct: 0.020 7/ 7 ??% ??% ??,?% 7 0 [[JMA: 4.0 =
V: 0.0 A-V: 3.956 ct: 0.022 8/ 8 ??% ??% ??,?% 8 0 [[JMv4l2: select tim=
eout
A: 4.5 V: 0.0 A-V: 4.460 ct: 0.025 9/ 9 ??% ??% ??,?% 9 0 [[JMA: 5.0 =
V: 0.0 A-V: 4.956 ct: 0.027 10/ 10 ??% ??% ??,?% 10 0 [[JMv4l2: select =
timeout
The Mplayer screen itself remains green the whole time.
So the surprise to me is that the Pinnacle device is not actually bro=
ken. By this point, I had been sure it was a hardware problem. Now I re=
alize that it's something else. And so I would again appreciate any sug=
gestions you might have. Thank you once again!
(My installation process, just for reference, distilled down:)
cd /usr/local/src
hg clone http://linuxtv.org/hg/v4l-dvb
cd v4l-dvb
make rminstall; make distclean; make; make install
cd /tmp
wget http://www.steventoth.net/linux/xc5000/HVR-12x0-14x0-17x0_1_25_=
25271_WHQL.zip
unzip -j HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip Driver85/hcw85bda.sy=
s
perl /usr/local/src/v4l-dvb/linux/Documentation/video4linux/extract_=
xc3028.pl
mv xc3028-v27.fw /lib/firmware/xc3028-v27.fw
_________________________________________________________________
Hotmail=AE has ever-growing storage! Don=92t worry about storage limi=
ts.
http://windowslive.com/Tutorial/Hotmail/Storage?ocid=3DTXT_TAGLM_WL_H=
M_Tutorial_Storage_062009--
To unsubscribe from this list: send the line "unsubscribe linux-media=
" in
More majordomo info at http://vger.kernel.org/majordomo-info.html
_________________________________________________________________
Bing=99 brings you maps, menus, and reviews organized in one place. =
Try it now.
http://www.bing.com/search?q=3Drestaurants&form=3DMLOGEN&publ=3DWLHMTAG=
&crea=3DTEXT_MLOGEN_Core_tagline_local_1x1--
To unsubscribe from this list: send the line "unsubscribe linux-media" =
in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Devin Heitmueller
2009-06-22 21:48:55 UTC
Permalink
Hello again. =A0I have some updates now that I've been able to make s=
ome further tests.
1) My Pinnacle PCTV HD Pro (800e) stick does, in fact, work correctly=
under Windows. =A0The scanning detects the one channel we're running o=
ver our closed circuit cable (channel 3) and displays it on-screen just=
fine. =A0(audio over channel 3 works as well)
2) Devin, my installation process is "hg clone http://linuxtv.org/hg/=
v4l-dvb; cd v4l-dvb; make rminstall; make distclean; make; make install=
" =A0This appears to install everything v4l-related as modules in the a=
=A0uname -r
2.6.24-24-server
find /lib/modules/`uname -r` -type f -name em28xx\* -o -name tvp\*
/lib/modules/2.6.24-24-server/kernel/drivers/media/video/tvp5150.ko
/lib/modules/2.6.24-24-server/kernel/drivers/media/video/em28xx/em28x=
x.ko
/lib/modules/2.6.24-24-server/kernel/drivers/media/video/em28xx/em28x=
x-dvb.ko
3) tvtime still hangs when launched.
4) Running zapping gives the error "VBI Initialization failed. =A0/de=
v/vbi0 (Pinnacle PCTV HD Pro) is not a raw vbi device)". =A0Continuing =
on and trying to choose the "Preferences" menu option segfaults the pro=
gram (and this is the Ubuntu-distributed "zapping" package)
mplayer -vo xv tv:// -tv driver=3Dv4l2:alsa:immediatemode=3D0:adevic=
e=3Dhw.1,0:norm=3Dntsc:chanlist=3Dus-cable:channel=3D3
MPlayer 1.0rc2-4.2.4 (C) 2000-2007 MPlayer Team
, Model: 23, Stepping: 10)
CPUflags: =A0MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled with runtime CPU detection.
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote =
control.
Playing tv://.
TV file format detected.
Selected driver: v4l2
=A0name: Video 4 Linux 2 input
=A0author: Martin Olschewski
=A0comment: first try, more to come ;-)
Selected device: Pinnacle PCTV HD Pro Stick
=A0Capabilites: =A0video capture =A0tuner =A0audio =A0read/write =A0s=
treaming
=A0supported norms: 0 =3D NTSC; 1 =3D NTSC-M; 2 =3D NTSC-M-JP; 3 =3D =
NTSC-M-KR; 4 =3D NTSC-443; 5 =3D PAL; 6 =3D PAL-BG; 7 =3D PAL-H; 8 =3D =
PAL-I; 9 =3D PAL-DK; 10 =3D PAL-M; 11 =3D PAL-N; 12 =3D PAL-Nc; 13 =3D =
PAL-60; 14 =3D SECAM;
=A0inputs: 0 =3D Television; 1 =3D Composite1; 2 =3D S-Video;
=A0Current input: 0
=A0Current format: YUYV
v4l2: current audio mode is : MONO
v4l2: ioctl set format failed: Invalid argument
v4l2: ioctl set format failed: Invalid argument
v4l2: ioctl set format failed: Invalid argument
Selected channel: 3 (freq: 61.250)
Video buffer shorter than 3 times audio frame duration.
You will probably experience heavy framedrops.
v4l2: ioctl query control failed: Invalid argument
v4l2: ioctl query control failed: Invalid argument
v4l2: ioctl query control failed: Invalid argument
v4l2: ioctl query control failed: Invalid argument
xscreensaver_disable: Could not find XScreenSaver window.
GNOME screensaver disabled
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D
Opening video decoder: [raw] RAW Uncompressed Video
VDec: vo config request - 640 x 480 (preferred colorspace: Packed YUY=
2)
VDec: using Packed YUY2 as output csp (no 0)
Movie-Aspect is undefined - no prescaling applied.
VO: [xv] 640x480 =3D> 640x480 Packed YUY2
Selected video codec: [rawyuy2] vfm: raw (RAW YUY2)
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D
Forced audio codec: mad
Opening audio decoder: [pcm] Uncompressed PCM audio decoder
AUDIO: 44100 Hz, 1 ch, s16le, 705.6 kbit/100.00% (ratio: 88200->88200=
)
Selected audio codec: [pcm] afm: pcm (Uncompressed PCM)
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D
AO: [pulse] 44100Hz 1ch s16le (2 bytes per sample)
Starting playback...
v4l2: select timeout
A: =A0 0.5 V: =A0 0.0 A-V: =A00.472 ct: =A00.000 =A0 1/ =A01 ??% ??% =
??,?% 1 0 [[JMA: =A0 0.9 V: =A0 0.0 A-V: =A00.940 ct: =A00.003 =A0 2/ =A0=
2 ??% ??% ??,?% 2 0 [[JMv4l2: select timeout
A: =A0 1.5 V: =A0 0.0 A-V: =A01.479 ct: =A00.007 =A0 3/ =A03 ??% ??% =
??,?% 3 0 [[JMA: =A0 2.0 V: =A0 0.0 A-V: =A01.981 ct: =A00.010 =A0 4/ =A0=
4 ??% ??% ??,?% 4 0 [[JMv4l2: select timeout
A: =A0 2.5 V: =A0 0.0 A-V: =A02.485 ct: =A00.013 =A0 5/ =A05 ??% ??% =
??,?% 5 0 [[JMA: =A0 3.0 V: =A0 0.0 A-V: =A02.957 ct: =A00.017 =A0 6/ =A0=
6 ??% ??% ??,?% 6 0 [[JMv4l2: select timeout
A: =A0 3.5 V: =A0 0.0 A-V: =A03.460 ct: =A00.020 =A0 7/ =A07 ??% ??% =
??,?% 7 0 [[JMA: =A0 4.0 V: =A0 0.0 A-V: =A03.956 ct: =A00.022 =A0 8/ =A0=
8 ??% ??% ??,?% 8 0 [[JMv4l2: select timeout
A: =A0 4.5 V: =A0 0.0 A-V: =A04.460 ct: =A00.025 =A0 9/ =A09 ??% ??% =
??,?% 9 0 [[JMA: =A0 5.0 V: =A0 0.0 A-V: =A04.956 ct: =A00.027 =A010/ 1=
0 ??% ??% ??,?% 10 0 [[JMv4l2: select timeout
The Mplayer screen itself remains green the whole time.
So the surprise to me is that the Pinnacle device is not actually bro=
ken. =A0By this point, I had been sure it was a hardware problem. =A0No=
w I realize that it's something else. =A0And so I would again appreciat=
e any suggestions you might have. =A0Thank you once again!
(My installation process, just for reference, distilled down:)
cd /usr/local/src
hg clone http://linuxtv.org/hg/v4l-dvb
cd v4l-dvb
make rminstall; make distclean; make; make install
cd /tmp
wget http://www.steventoth.net/linux/xc5000/HVR-12x0-14x0-17x0_1_25_=
25271_WHQL.zip
unzip -j HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip Driver85/hcw85bda.sy=
s
perl /usr/local/src/v4l-dvb/linux/Documentation/video4linux/extract_=
xc3028.pl
mv xc3028-v27.fw /lib/firmware/xc3028-v27.fw
_________________________________________________________________
Hotmail=AE has ever-growing storage! Don=92t worry about storage limi=
ts.
http://windowslive.com/Tutorial/Hotmail/Storage?ocid=3DTXT_TAGLM_WL_H=
M_Tutorial_Storage_062009

Ok, here's something to try. I assume you are rebooting the box,
keeping the stick plugged in. Please unplug the device, plug it back
in, and then post the full dmesg output.

Devin

--=20
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com
--
To unsubscribe from this list: send the line "unsubscribe linux-media" =
in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
George Adams
2009-06-23 00:14:00 UTC
Permalink
Ok, here's something to try. I assume you are rebooting the box,
keeping the stick plugged in. Please unplug the device, plug it back
in, and then post the full dmesg output.
Devin
Actually I've been unplugging the device, booting, letting the system s=
ettle down, then plugging the device in. But here is the dmesg output =
that you requested, showing a boot with the device plugged in, then the=
device removed, then the device plugged back in.

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-24-server (***@rothera) (gcc ver=
sion 4.2.4 (Ubuntu 4.2.4-1ubuntu4)) #1 SMP Wed Apr 15 16:36:01 UTC 2009=
(Ubuntu 2.6.24-24.53-server)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserve=
d)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserve=
d)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfeb0000 (usable)
[ 0.000000] BIOS-e820: 00000000cfeb0000 - 00000000cfee2000 (ACPI NV=
S)
[ 0.000000] BIOS-e820: 00000000cfee2000 - 00000000cfef0000 (ACPI da=
ta)
[ 0.000000] BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserve=
d)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserve=
d)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserve=
d)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] 3968MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f57a0
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] Entering add_active_range(0, 0, 1245184) 0 entries of 25=
6 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 1245184
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 1245184
[ 0.000000] On node 0 totalpages: 1245184
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 7936 pages used for memmap
[ 0.000000] HighMem zone: 1007872 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F75D0 checksum 0
[ 0.000000] ACPI: RSDP 000F75D0, 0014 (r0 GBT )
[ 0.000000] ACPI: RSDT CFEE2040, 003C (r1 GBT GBTUACPI 42302E31 G=
BTU 1010101)
[ 0.000000] ACPI: FACP CFEE20C0, 0074 (r1 GBT GBTUACPI 42302E31 G=
BTU 1010101)
[ 0.000000] ACPI: DSDT CFEE2180, 50A9 (r1 GBT GBTUACPI 1000 M=
SFT 100000C)
[ 0.000000] ACPI: FACS CFEB0000, 0040
[ 0.000000] ACPI: EUDS CFEE79C0, 0500 (r1 GBT 0 =
0)
[ 0.000000] ACPI: HPET CFEE7880, 0038 (r1 GBT GBTUACPI 42302E31 G=
BTU 98)
[ 0.000000] ACPI: MCFG CFEE7900, 003C (r1 GBT GBTUACPI 42302E31 G=
BTU 1010101)
[ 0.000000] ACPI: APIC CFEE7280, 0084 (r1 GBT GBTUACPI 42302E31 G=
BTU 1010101)
[ 0.000000] ACPI: SSDT CFEE87F0, 03AB (r1 PmRef CpuPm 3000 I=
NTL 20040311)
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 7:7 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled)
[ 0.000000] Processor #3 7:7 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 7:7 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] Processor #2 7:7 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GS=
I 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high lev=
el)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at e6000000 (gap: e400=
0000:1ac00000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009e00=
0 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a000=
0 - 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f000=
0 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. =
Total pages: 1235456
[ 0.000000] Kernel command line: root=3DUUID=3D2f7e91eb-9b4a-4f03-ae=
da-c472bd2d7077 ro nosplash vga=3D0x034a
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2833.055 MHz processor.
[ 25.149648] Console: colour dummy device 80x25
[ 25.149650] console [tty0] enabled
[ 25.149862] Dentry cache hash table entries: 131072 (order: 7, 52428=
8 bytes)
[ 25.150021] Inode-cache hash table entries: 65536 (order: 6, 262144 =
bytes)
[ 25.301649] Memory: 4140224k/4980736k available (2258k kernel code, =
51520k reserved, 1037k data, 384k init, 3275456k highmem)
[ 25.301658] virtual kernel memory layout:
[ 25.301659] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
[ 25.301659] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 25.301660] vmalloc : 0xf8800000 - 0xffbfe000 ( 115 MB)
[ 25.301660] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 25.301661] .init : 0xc043e000 - 0xc049e000 ( 384 kB)
[ 25.301662] .data : 0xc0334a89 - 0xc0437fe4 (1037 kB)
[ 25.301662] .text : 0xc0100000 - 0xc0334a89 (2258 kB)
[ 25.301673] Checking if this processor honours the WP bit even in su=
pervisor mode... Ok.
[ 25.301699] SLUB: Genslabs=3D11, HWalign=3D64, Order=3D0-1, MinObjec=
ts=3D4, CPUs=3D4, Nodes=3D1
[ 25.301788] hpet clockevent registered
[ 25.451604] Calibrating delay using timer specific routine.. 5669.18=
BogoMIPS (lpj=3D28345913)
[ 25.451620] Security Framework initialized
[ 25.451625] SELinux: Disabled at boot.
[ 25.451633] AppArmor: AppArmor initialized
[ 25.451637] Failure registering capabilities with primary security m=
odule.
[ 25.451643] Mount-cache hash table entries: 512
[ 25.451718] Initializing cgroup subsys ns
[ 25.451722] Initializing cgroup subsys cpuacct
[ 25.451730] CPU: After generic identify, caps: bfebfbff 20100000 000=
00000 00000000 0408e3fd 00000000 00000001 00000000
[ 25.451734] monitor/mwait feature present.
[ 25.451736] using mwait in idle threads.
[ 25.451739] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 25.451742] CPU: L2 cache: 6144K
[ 25.451744] CPU: Physical Processor ID: 0
[ 25.451746] CPU: Processor Core ID: 0
[ 25.451748] CPU: After all inits, caps: bfebfbff 20100000 00000000 0=
0043940 0408e3fd 00000000 00000001 00000000
[ 25.451753] Compat vDSO mapped to ffffe000.
[ 25.451762] Checking 'hlt' instruction... OK.
[ 25.491877] SMP alternatives: switching to UP code
[ 25.492938] Early unpacking initramfs... done
[ 25.697565] ACPI: Core revision 20070126
[ 25.697592] ACPI: Looking for DSDT in initramfs... error, file /DSDT=
=2Eaml not found.
[ 25.699413] CPU0: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz st=
epping 0a
[ 25.699424] SMP alternatives: switching to SMP code
[ 25.699936] Booting processor 1/1 eip 3000
[ 25.710509] Initializing CPU#1
[ 25.851098] Calibrating delay using timer specific routine.. 5666.02=
BogoMIPS (lpj=3D28330102)
[ 25.851103] CPU: After generic identify, caps: bfebfbff 20100000 000=
00000 00000000 0408e3fd 00000000 00000001 00000000
[ 25.851106] monitor/mwait feature present.
[ 25.851107] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 25.851108] CPU: L2 cache: 6144K
[ 25.851109] CPU: Physical Processor ID: 0
[ 25.851110] CPU: Processor Core ID: 1
[ 25.851111] CPU: After all inits, caps: bfebfbff 20100000 00000000 0=
0043940 0408e3fd 00000000 00000001 00000000
[ 25.851891] CPU1: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz st=
epping 0a
[ 25.851920] SMP alternatives: switching to SMP code
[ 25.852457] Booting processor 2/2 eip 3000
[ 25.863027] Initializing CPU#2
[ 26.010897] Calibrating delay using timer specific routine.. 5666.05=
BogoMIPS (lpj=3D28330270)
[ 26.010902] CPU: After generic identify, caps: bfebfbff 20100000 000=
00000 00000000 0408e3fd 00000000 00000001 00000000
[ 26.010905] monitor/mwait feature present.
[ 26.010906] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 26.010907] CPU: L2 cache: 6144K
[ 26.010909] CPU: Physical Processor ID: 0
[ 26.010909] CPU: Processor Core ID: 2
[ 26.010910] CPU: After all inits, caps: bfebfbff 20100000 00000000 0=
0043940 0408e3fd 00000000 00000001 00000000
[ 26.011708] CPU2: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz st=
epping 0a
[ 26.011729] SMP alternatives: switching to SMP code
[ 26.012096] Booting processor 3/3 eip 3000
[ 26.022666] Initializing CPU#3
[ 26.170696] Calibrating delay using timer specific routine.. 5666.05=
BogoMIPS (lpj=3D28330287)
[ 26.170700] CPU: After generic identify, caps: bfebfbff 20100000 000=
00000 00000000 0408e3fd 00000000 00000001 00000000
[ 26.170703] monitor/mwait feature present.
[ 26.170705] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 26.170706] CPU: L2 cache: 6144K
[ 26.170707] CPU: Physical Processor ID: 0
[ 26.170708] CPU: Processor Core ID: 3
[ 26.170709] CPU: After all inits, caps: bfebfbff 20100000 00000000 0=
0043940 0408e3fd 00000000 00000001 00000000
[ 26.171543] CPU3: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz st=
epping 0a
[ 26.171564] Total of 4 processors activated (22667.31 BogoMIPS).
[ 26.171701] ENABLING IO-APIC IRQs
[ 26.171856] ..TIMER: vector=3D0x31 apic1=3D0 pin1=3D2 apic2=3D-1 pin=
2=3D-1
[ 26.390475] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 26.410477] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 26.430489] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 26.450483] Brought up 4 CPUs
[ 26.450515] CPU0 attaching sched-domain:
[ 26.450521] domain 0: span 03
[ 26.450522] groups: 01 02
[ 26.450524] domain 1: span 0f
[ 26.450525] groups: 03 0c
[ 26.450527] CPU1 attaching sched-domain:
[ 26.450527] domain 0: span 03
[ 26.450528] groups: 02 01
[ 26.450530] domain 1: span 0f
[ 26.450531] groups: 03 0c
[ 26.450532] CPU2 attaching sched-domain:
[ 26.450533] domain 0: span 0c
[ 26.450534] groups: 04 08
[ 26.450535] domain 1: span 0f
[ 26.450536] groups: 0c 03
[ 26.450538] CPU3 attaching sched-domain:
[ 26.450539] domain 0: span 0c
[ 26.450539] groups: 08 04
[ 26.450541] domain 1: span 0f
[ 26.450542] groups: 0c 03
[ 26.450736] net_namespace: 64 bytes
[ 26.450745] Booting paravirtualized kernel on bare hardware
[ 26.451021] Time: 22:55:06 Date: 06/22/09
[ 26.451038] NET: Registered protocol family 16
[ 26.451141] EISA bus registered
[ 26.451145] ACPI: bus type pci registered
[ 26.457064] PCI: PCI BIOS revision 3.00 entry at 0xfb9e0, last bus=3D=
6
[ 26.457066] PCI: Using configuration type 1
[ 26.457084] Setting up standard PCI resources
[ 26.459899] ACPI: EC: Look up EC in DSDT
[ 26.462862] ACPI: Interpreter enabled
[ 26.462868] ACPI: (supports S0 S3 S4 S5)
[ 26.462882] ACPI: Using IOAPIC for interrupt routing
[ 26.465771] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 26.467154] PCI: Transparent bridge - 0000:00:1e.0
[ 26.467182] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 26.467270] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 26.467315] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 26.467360] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 26.467403] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[ 26.467446] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 26.477695] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 =
12 14 *15)
[ 26.477760] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11=
12 14 15)
[ 26.477824] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 9 10 11=
12 14 15)
[ 26.477887] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11=
12 14 15)
[ 26.477951] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 =
12 *14 15)
[ 26.478014] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11=
12 14 15)
[ 26.478078] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11=
12 14 15)
[ 26.478141] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11=
12 14 15)
[ 26.478216] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 26.478233] pnp: PnP ACPI init
[ 26.478238] ACPI: bus type pnp registered
[ 26.479627] pnpacpi: exceeded the max number of mem resources: 12
[ 26.479708] pnp: PnP ACPI: found 14 devices
[ 26.479710] ACPI: ACPI bus type pnp unregistered
[ 26.479714] PnPBIOS: Disabled by ACPI PNP
[ 26.479831] PCI: Using ACPI for IRQ routing
[ 26.479834] PCI: If a device doesn't work, try "pci=3Drouteirq". If=
it helps, post a report
[ 26.570203] NET: Registered protocol family 8
[ 26.570207] NET: Registered protocol family 20
[ 26.570229] NetLabel: Initializing
[ 26.570232] NetLabel: domain hash size =3D 128
[ 26.570235] NetLabel: protocols =3D UNLABELED CIPSOv4
[ 26.570245] NetLabel: unlabeled traffic allowed by default
[ 26.570251] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 26.570257] hpet0: 4 64-bit timers, 14318180 Hz
[ 26.571277] AppArmor: AppArmor Filesystem Enabled
[ 26.580180] Time: tsc clocksource has been installed.
[ 26.580187] Switched to high resolution mode on CPU 0
[ 26.580239] Switched to high resolution mode on CPU 1
[ 26.590125] Switched to high resolution mode on CPU 2
[ 26.590160] Switched to high resolution mode on CPU 3
[ 26.620151] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 26.620156] system 00:01: ioport range 0x290-0x29f has been reserved
[ 26.620160] system 00:01: ioport range 0x800-0x805 has been reserved
[ 26.620164] system 00:01: ioport range 0x290-0x294 has been reserved
[ 26.620168] system 00:01: ioport range 0x880-0x88f has been reserved
[ 26.620178] system 00:0a: ioport range 0x400-0x4cf has been reserved
[ 26.620182] system 00:0a: ioport range 0x4d2-0x4ff has been reserved
[ 26.620189] system 00:0b: iomem range 0xe0000000-0xe3ffffff could no=
t be reserved
[ 26.620196] system 00:0c: iomem range 0xd5000-0xd7fff has been reser=
ved
[ 26.620200] system 00:0c: iomem range 0xf0000-0xf7fff could not be r=
eserved
[ 26.620205] system 00:0c: iomem range 0xf8000-0xfbfff could not be r=
eserved
[ 26.620209] system 00:0c: iomem range 0xfc000-0xfffff could not be r=
eserved
[ 26.620213] system 00:0c: iomem range 0xcfeb0000-0xcfefffff could no=
t be reserved
[ 26.620218] system 00:0c: iomem range 0x0-0x9ffff could not be reser=
ved
[ 26.620222] system 00:0c: iomem range 0x100000-0xcfeaffff could not =
be reserved
[ 26.620227] system 00:0c: iomem range 0xfec00000-0xfec00fff could no=
t be reserved
[ 26.620232] system 00:0c: iomem range 0xfed10000-0xfed1dfff could no=
t be reserved
[ 26.620237] system 00:0c: iomem range 0xfed20000-0xfed8ffff could no=
t be reserved
[ 26.620242] system 00:0c: iomem range 0xfee00000-0xfee00fff could no=
t be reserved
[ 26.620247] system 00:0c: iomem range 0xffb00000-0xffb7ffff could no=
t be reserved
[ 26.650457] PCI: Bridge: 0000:00:01.0
[ 26.650459] IO window: 9000-9fff
[ 26.650462] MEM window: e4000000-e7ffffff
[ 26.650465] PREFETCH window: d0000000-dfffffff
[ 26.650468] PCI: Bridge: 0000:00:1c.0
[ 26.650470] IO window: disabled.
[ 26.650474] MEM window: disabled.
[ 26.650477] PREFETCH window: disabled.
[ 26.650481] PCI: Bridge: 0000:00:1c.3
[ 26.650483] IO window: a000-afff
[ 26.650487] MEM window: ea100000-ea1fffff
[ 26.650490] PREFETCH window: disabled.
[ 26.650495] PCI: Bridge: 0000:00:1c.4
[ 26.650497] IO window: b000-bfff
[ 26.650501] MEM window: e8000000-e8ffffff
[ 26.650504] PREFETCH window: ea000000-ea0fffff
[ 26.650509] PCI: Bridge: 0000:00:1c.5
[ 26.650511] IO window: c000-cfff
[ 26.650515] MEM window: e9000000-e9ffffff
[ 26.650518] PREFETCH window: ea200000-ea2fffff
[ 26.650523] PCI: Bridge: 0000:00:1e.0
[ 26.650525] IO window: d000-dfff
[ 26.650529] MEM window: ea300000-ea3fffff
[ 26.650532] PREFETCH window: disabled.
[ 26.650541] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, lo=
w) -> IRQ 16
[ 26.650546] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 26.650558] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, lo=
w) -> IRQ 16
[ 26.650563] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 26.650575] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, lo=
w) -> IRQ 17
[ 26.650580] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 26.650592] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, lo=
w) -> IRQ 16
[ 26.650597] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 26.650609] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, lo=
w) -> IRQ 18
[ 26.650614] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 26.650621] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 26.650627] NET: Registered protocol family 2
[ 26.750003] IP route cache hash table entries: 32768 (order: 5, 1310=
72 bytes)
[ 26.750162] TCP established hash table entries: 131072 (order: 8, 10=
48576 bytes)
[ 26.750409] TCP bind hash table entries: 65536 (order: 7, 524288 byt=
es)
[ 26.750519] TCP: Hash tables configured (established 131072 bind 655=
36)
[ 26.750522] TCP reno registered
[ 26.780011] checking if image is initramfs... it is
[ 27.183680] Freeing initrd memory: 7342k freed
[ 27.184741] audit: initializing netlink socket (disabled)
[ 27.184753] audit(1245711306.732:1): initialized
[ 27.185110] highmem bounce pool size: 64 pages
[ 27.185113] Total HugeTLB memory allocated, 0
[ 27.187303] VFS: Disk quotas dquot_6.5.1
[ 27.187368] Dquot-cache hash table entries: 1024 (order 0, 4096 byte=
s)
[ 27.187520] io scheduler noop registered
[ 27.187522] io scheduler anticipatory registered
[ 27.187525] io scheduler deadline registered (default)
[ 27.187532] io scheduler cfq registered
[ 27.219405] Boot video device is 0000:01:00.0
[ 27.219493] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 27.219519] assign_interrupt_mode Found MSI capability
[ 27.219556] Allocate Port Service[0000:00:01.0:pcie00]
[ 27.219622] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 27.219651] assign_interrupt_mode Found MSI capability
[ 27.219675] Allocate Port Service[0000:00:1c.0:pcie00]
[ 27.219717] Allocate Port Service[0000:00:1c.0:pcie02]
[ 27.219791] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 27.219820] assign_interrupt_mode Found MSI capability
[ 27.219844] Allocate Port Service[0000:00:1c.3:pcie00]
[ 27.219884] Allocate Port Service[0000:00:1c.3:pcie02]
[ 27.219957] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 27.219986] assign_interrupt_mode Found MSI capability
[ 27.220010] Allocate Port Service[0000:00:1c.4:pcie00]
[ 27.220051] Allocate Port Service[0000:00:1c.4:pcie02]
[ 27.220125] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 27.220154] assign_interrupt_mode Found MSI capability
[ 27.220178] Allocate Port Service[0000:00:1c.5:pcie00]
[ 27.220213] Allocate Port Service[0000:00:1c.5:pcie02]
[ 27.220489] isapnp: Scanning for PnP cards...
[ 27.575694] isapnp: No Plug & Play device found
[ 27.603318] Real Time Clock Driver v1.12ac
[ 27.603452] hpet_resources: 0xfed00000 is busy
[ 27.603484] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ=
sharing enabled
[ 27.604756] RAMDISK driver initialized: 16 RAM disks of 65536K size =
1024 blocksize
[ 27.604820] input: Macintosh mouse button emulation as /devices/virt=
ual/input/input0
[ 27.604923] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60=
,0x64 irq 1,12
[ 27.605278] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 27.605285] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 27.651393] mice: PS/2 mouse device common for all mice
[ 27.651486] EISA: Probing bus 0 at eisa.0
[ 27.651516] EISA: Detected 0 cards.
[ 27.651518] cpuidle: using governor ladder
[ 27.651520] cpuidle: using governor menu
[ 27.651564] NET: Registered protocol family 1
[ 27.651580] Using IPI No-Shortcut mode
[ 27.651595] registered taskstats version 1
[ 27.651674] Magic number: 13:877:957
[ 27.651681] hash matches device ptyze
[ 27.651690] BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
[ 27.652039] Freeing unused kernel memory: 384k freed
[ 27.652067] Write protecting the kernel read-only data: 828k
[ 27.681807] input: AT Translated Set 2 keyboard as /devices/platform=
/i8042/serio0/input/input1
[ 27.745291] vesafb: framebuffer at 0xe5000000, mapped to 0xf8880000,=
using 14336k, total 14336k
[ 27.745299] vesafb: mode is 1600x1200x32, linelength=3D6400, pages=3D=
1
[ 27.745303] vesafb: protected mode interface info at c000:c360
[ 27.745306] vesafb: pmi: set display start =3D c00cc3c3, set palette=
=3D c00cc41e
[ 27.745310] vesafb: pmi: ports =3D 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3=
c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da=20
[ 27.745323] vesafb: scrolling: redraw
[ 27.745327] vesafb: Truecolor: size=3D8:8:8:8, shift=3D24:16:8:0
[ 27.745455] Console: switching to colour frame buffer device 200x75
[ 27.792243] fb0: VESA VGA frame buffer device
[ 27.898829] fuse init (API version 7.9)
[ 27.909053] ACPI: SSDT CFEE7F10, 022A (r1 PmRef Cpu0Ist 3000 I=
NTL 20040311)
[ 27.909466] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 27.909697] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 27.910003] ACPI: SSDT CFEE83D0, 0152 (r1 PmRef Cpu1Ist 3000 I=
NTL 20040311)
[ 27.910480] ACPI: CPU3 (power states: C1[C1] C2[C2] C3[C3])
[ 27.910714] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 27.911046] ACPI: SSDT CFEE8530, 0152 (r1 PmRef Cpu2Ist 3000 I=
NTL 20040311)
[ 27.911471] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 27.911704] ACPI: Processor [CPU2] (supports 8 throttling states)
[ 27.912015] ACPI: SSDT CFEE8690, 0152 (r1 PmRef Cpu3Ist 3000 I=
NTL 20040311)
[ 27.912510] ACPI: CPU2 (power states: C1[C1] C2[C2] C3[C3])
[ 27.912743] ACPI: Processor [CPU3] (supports 8 throttling states)
[ 27.998766] usbcore: registered new interface driver usbfs
[ 27.998986] usbcore: registered new interface driver hub
[ 28.003540] usbcore: registered new device driver usb
[ 28.005711] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, lo=
w) -> IRQ 19
[ 28.006001] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 28.006004] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 28.006329] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned =
bus number 1
[ 28.010489] PCI: cache line size of 32 is not supported by device 00=
00:00:1a.7
[ 28.010494] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xea405000
[ 28.014580] USB Universal Host Controller Interface driver v3.0
[ 28.034931] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, drive=
r 10 Dec 2004
[ 28.035307] usb usb1: configuration #1 chosen from 1 choice
[ 28.035536] hub 1-0:1.0: USB hub found
[ 28.035683] hub 1-0:1.0: 6 ports detected
[ 28.061516] SCSI subsystem initialized
[ 28.082186] libata version 3.00 loaded.
[ 28.142086] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, lo=
w) -> IRQ 16
[ 28.142368] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 28.142370] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 28.142573] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned =
bus number 2
[ 28.142859] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e500
[ 28.143129] usb usb2: configuration #1 chosen from 1 choice
[ 28.143343] hub 2-0:1.0: USB hub found
[ 28.143480] hub 2-0:1.0: 2 ports detected
[ 28.248159] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, lo=
w) -> IRQ 20
[ 28.248443] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 28.248445] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 28.248649] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned =
bus number 3
[ 28.248939] uhci_hcd 0000:00:1a.1: irq 20, io base 0x0000e000
[ 28.249208] usb usb3: configuration #1 chosen from 1 choice
[ 28.249425] hub 3-0:1.0: USB hub found
[ 28.249564] hub 3-0:1.0: 2 ports detected
[ 28.358015] ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, lo=
w) -> IRQ 19
[ 28.370024] PCI: Setting latency timer of device 0000:00:1a.2 to 64
[ 28.370026] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 28.381994] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned =
bus number 4
[ 28.394119] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000e100
[ 28.406322] usb usb4: configuration #1 chosen from 1 choice
[ 28.417881] usb 1-3: new high speed USB device using ehci_hcd and ad=
dress 2
[ 28.430878] hub 4-0:1.0: USB hub found
[ 28.443170] hub 4-0:1.0: 2 ports detected
[ 28.557759] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, lo=
w) -> IRQ 21
[ 28.570348] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 28.570355] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 28.578077] usb 1-3: configuration #1 chosen from 1 choice
[ 28.595435] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned =
bus number 5
[ 28.608107] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000e200
[ 28.620665] usb usb5: configuration #1 chosen from 1 choice
[ 28.633089] hub 5-0:1.0: USB hub found
[ 28.645357] hub 5-0:1.0: 2 ports detected
[ 28.757509] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, lo=
w) -> IRQ 17
[ 28.769736] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 28.769738] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 28.781867] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned =
bus number 6
[ 28.794105] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e300
[ 28.806274] usb usb6: configuration #1 chosen from 1 choice
[ 28.818410] hub 6-0:1.0: USB hub found
[ 28.830407] hub 6-0:1.0: 2 ports detected
[ 28.947270] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, lo=
w) -> IRQ 19
[ 28.959445] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 28.959447] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 28.971548] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned =
bus number 7
[ 28.983689] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000e400
[ 28.995866] usb usb7: configuration #1 chosen from 1 choice
[ 29.008003] hub 7-0:1.0: USB hub found
[ 29.020014] hub 7-0:1.0: 2 ports detected
[ 29.139582] ACPI: PCI Interrupt 0000:06:07.0[A] -> GSI 23 (level, lo=
w) -> IRQ 21
[ 29.202012] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=3D[21] MMI=
O=3D[ea344000-ea3447ff] Max Packet=3D[2048] IR/IT contexts=3D[4/8]
[ 29.214462] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 29.226763] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, lo=
w) -> IRQ 16
[ 29.239260] PCI: Setting latency timer of device 0000:04:00.0 to 64
[ 29.239452] eth0: RTL8168c/8111c at 0xf8852000, 00:1f:d0:d5:14:97, X=
ID 3c4000c0 IRQ 218
[ 29.253608] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 29.266034] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 17 (level, lo=
w) -> IRQ 18
[ 29.278604] PCI: Setting latency timer of device 0000:05:00.0 to 64
[ 29.278783] eth1: RTL8168c/8111c at 0xf968e000, 00:1f:d0:81:2d:a3, X=
ID 3c4000c0 IRQ 217
[ 29.293140] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, lo=
w) -> IRQ 21
[ 29.305841] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 29.305843] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 29.318486] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned =
bus number 8
[ 29.335018] PCI: cache line size of 32 is not supported by device 00=
00:00:1d.7
[ 29.335021] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xea404000
[ 29.370510] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, drive=
r 10 Dec 2004
[ 29.383254] usb usb8: configuration #1 chosen from 1 choice
[ 29.396009] hub 8-0:1.0: USB hub found
[ 29.408735] hub 8-0:1.0: 6 ports detected
[ 29.530296] ahci 0000:00:1f.2: version 3.0
[ 29.530317] ACPI: PCI Interrupt 0000:03:00.1[B] -> ACPI: PCI Interru=
pt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 17
[ 29.543566] GSI 16 (level, low) -> IRQ 16
[ 29.543589] PCI: Setting latency timer of device 0000:03:00.1 to 64
[ 29.543599] ACPI: PCI interrupt for device 0000:03:00.1 disabled
[ 30.526570] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00ee5c5400=
001fd0]
[ 30.536493] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbp=
s 0x3f impl SATA mode
[ 30.550006] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo=
pmp pio slum part=20
[ 30.550010] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 30.550219] scsi0 : ahci
[ 30.550250] scsi1 : ahci
[ 30.550275] scsi2 : ahci
[ 30.550303] scsi3 : ahci
[ 30.550328] scsi4 : ahci
[ 30.550353] scsi5 : ahci
[ 30.550408] ata1: SATA max UDMA/133 abar ***@0xea406000 port 0xea4=
06100 irq 216
[ 30.550410] ata2: SATA max UDMA/133 abar ***@0xea406000 port 0xea4=
06180 irq 216
[ 30.550412] ata3: SATA max UDMA/133 abar ***@0xea406000 port 0xea4=
06200 irq 216
[ 30.550414] ata4: SATA max UDMA/133 abar ***@0xea406000 port 0xea4=
06280 irq 216
[ 30.550415] ata5: SATA max UDMA/133 abar ***@0xea406000 port 0xea4=
06300 irq 216
[ 30.550417] ata6: SATA max UDMA/133 abar ***@0xea406000 port 0xea4=
06380 irq 216
[ 32.255569] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 32.296241] ata1.00: ATA-8: ST3640323AS, SD35, max UDMA/133
[ 32.308304] ata1.00: 1250263728 sectors, multi 0: LBA48 NCQ (depth 3=
1/32)
[ 32.362095] ata1.00: configured for UDMA/133
[ 32.374241] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 =
t4
[ 32.386393] ata1: irq_stat 0x00400040, connection status changed
[ 32.468796] ata1.00: configured for UDMA/133
[ 32.480879] ata1: EH complete
[ 33.201882] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 33.214690] ata2.00: ATA-8: WDC WD1001FALS-00J7B1, 05.00K05, max UDM=
A/133
[ 33.226886] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 3=
1/32)
[ 33.239933] ata2.00: configured for UDMA/133
[ 33.940956] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 34.111889] ata3.00: ATAPI: HL-DT-STDVD-RAM GH22NS30, 1.01, max UDMA=
/100
[ 34.285450] ata3.00: configured for UDMA/100
[ 34.640080] ata4: SATA link down (SStatus 0 SControl 300)
[ 35.003374] ata5: SATA link down (SStatus 0 SControl 300)
[ 35.361676] ata6: SATA link down (SStatus 0 SControl 300)
[ 35.373699] scsi 0:0:0:0: Direct-Access ATA ST3640323AS =
SD35 PQ: 0 ANSI: 5
[ 35.385953] scsi 1:0:0:0: Direct-Access ATA WDC WD1001FALS-=
0 05.0 PQ: 0 ANSI: 5
[ 35.399112] scsi 2:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NS3=
0 1.01 PQ: 0 ANSI: 5
[ 35.411198] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, lo=
w) -> IRQ 17
[ 36.427857] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbp=
s 0x3 impl SATA mode
[ 36.439967] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio s=
lum part=20
[ 36.452053] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 36.452154] scsi6 : ahci
[ 36.464179] scsi7 : ahci
[ 36.476073] ata7: SATA max UDMA/133 abar ***@0xea100000 port 0xea1=
00100 irq 17
[ 36.488227] ata8: SATA max UDMA/133 abar ***@0xea100000 port 0xea1=
00180 irq 17
[ 36.847320] ata7: SATA link down (SStatus 0 SControl 300)
[ 37.210615] ata8: SATA link down (SStatus 0 SControl 300)
[ 37.222451] ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 16 (level, lo=
w) -> IRQ 16
[ 37.234621] PCI: Setting latency timer of device 0000:03:00.1 to 64
[ 37.234671] scsi8 : pata_jmicron
[ 37.234691] Driver 'sd' needs updating - please use bus_type methods
[ 37.234727] sd 0:0:0:0: [sda] 1250263728 512-byte hardware sectors (=
640135 MB)
[ 37.234733] sd 0:0:0:0: [sda] Write Protect is off
[ 37.234735] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 37.234743] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enab=
led, doesn't support DPO or FUA
[ 37.234769] sd 0:0:0:0: [sda] 1250263728 512-byte hardware sectors (=
640135 MB)
[ 37.234774] sd 0:0:0:0: [sda] Write Protect is off
[ 37.234775] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 37.234784] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enab=
led, doesn't support DPO or FUA
[ 37.234786] sda: sda1 sda2 <scsi9 : pata_jmicron
[ 37.343025] ata9: PATA max UDMA/100 cmd 0xa000 ctl 0xa100 bmdma 0xa4=
00 irq 16
[ 37.355318] ata10: PATA max UDMA/100 cmd 0xa200 ctl 0xa300 bmdma 0xa=
408 irq 16
[ 37.367621] sda5>
[ 37.379764] sd 0:0:0:0: [sda] Attached SCSI disk
[ 37.391719] sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors (=
1000205 MB)
[ 37.391763] Driver 'sr' needs updating - please use bus_type methods
[ 37.415453] sd 1:0:0:0: [sdb] Write Protect is off
[ 37.427196] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 37.427225] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enab=
led, doesn't support DPO or FUA
[ 37.439129] sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors (=
1000205 MB)
[ 37.450912] sd 1:0:0:0: [sdb] Write Protect is off
[ 37.462524] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 37.462537] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enab=
led, doesn't support DPO or FUA
[ 37.474266] sdb: sdb1
[ 37.501085] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 37.514592] sr0: scsi3-mmc drive: 40x/48x writer dvd-ram cd/rw xa/fo=
rm2 cdda tray
[ 37.526436] Uniform CD-ROM driver Revision: 3.20
[ 37.538156] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 37.538254] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 37.550040] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 37.561800] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 40.550287] Attempting manual resume
[ 40.561576] swsusp: Resume From Partition 8:5
[ 40.561577] PM: Checking swsusp image.
[ 40.561816] PM: Resume from disk failed.
[ 40.630963] kjournald starting. Commit interval 5 seconds
[ 40.630972] EXT3-fs: mounted filesystem with ordered data mode.
[ 44.512839] input: PC Speaker as /devices/platform/pcspkr/input/inpu=
t2
[ 44.845696] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 44.940928] input: Power Button (FF) as /devices/virtual/input/input=
3
[ 44.970233] shpchp: Standard Hot Plug PCI Controller Driver version:=
0.4
[ 45.082560] r8169: eth1: link up
[ 45.094924] r8169: eth1: link up
[ 45.119541] r8169: eth0: link up
[ 45.131411] r8169: eth0: link up
[ 45.147179] ACPI: Power Button (FF) [PWRF]
[ 45.159059] input: Power Button (CM) as /devices/virtual/input/input=
4
[ 45.186094] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, lo=
w) -> IRQ 22
[ 45.198640] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 45.250138] Linux agpgart interface v0.102
[ 45.281073] hda_codec: Unknown model for ALC882, trying auto-probe f=
rom BIOS...
[ 45.316728] ACPI: Power Button (CM) [PWRB]
[ 45.496918] Linux video capture interface: v2.00
[ 45.707263] input: ImExPS/2 Generic Explorer Mouse as /devices/platf=
orm/i8042/serio1/input/input5
[ 45.812361] parport_pc 00:07: reported by Plug and Play ACPI
[ 45.824744] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 46.050280] nvidia: module license 'NVIDIA' taints kernel.
[ 46.315025] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, lo=
w) -> IRQ 16
[ 46.327436] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 46.327507] NVRM: loading NVIDIA UNIX x86 Kernel Module 185.18.14 =
Wed May 27 02:23:13 PDT 2009
[ 46.342689] NET: Registered protocol family 10
[ 46.355506] lo: Disabled Privacy Extensions
[ 46.410920] ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 19 (level, lo=
w) -> IRQ 17
[ 46.423671] parport1: PC-style at 0xd400 [PCSPP,TRISTATE,EPP]
[ 46.516652] 0000:06:01.0: ttyS0 at I/O 0xd200 (irq =3D 17) is a 1655=
0A
[ 46.529508] 0000:06:01.0: ttyS1 at I/O 0xd300 (irq =3D 17) is a 1655=
0A
[ 46.544027] em28xx: New device Pinnacle Systems PCTV 800e @ 480 Mbps=
(2304:0227, interface 0, class 0)
[ 46.556798] em28xx #0: Identified as Pinnacle PCTV HD Pro Stick (car=
d=3D17)
[ 46.569704] em28xx #0: chip ID is em2882/em2883
[ 46.793546] em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 27 02 d0 12 =
5c 03 8e 16 a4 1c
[ 46.806421] em28xx #0: i2c eeprom 10: 6a 24 27 57 46 07 01 00 00 00 =
00 00 00 00 00 00
[ 46.819162] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 =
00 00 5b 1c 00 00
[ 46.831734] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 =
00 00 00 00 00 00
[ 46.844187] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 =
00 00 00 00 00 00
[ 46.856693] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 =
00 00 00 00 00 00
[ 46.868917] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 =
24 03 50 00 69 00
[ 46.880961] em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 =
65 00 20 00 53 00
[ 46.892895] em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 =
73 00 00 00 16 03
[ 46.904710] em28xx #0: i2c eeprom 90: 50 00 43 00 54 00 56 00 20 00 =
38 00 30 00 30 00
[ 46.916375] em28xx #0: i2c eeprom a0: 65 00 00 00 1c 03 30 00 36 00 =
31 00 30 00 30 00
[ 46.927936] em28xx #0: i2c eeprom b0: 31 00 30 00 33 00 39 00 34 00 =
34 00 32 00 00 00
[ 46.939369] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 =
00 00 00 00 00 00
[ 46.950614] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 =
00 00 00 00 00 00
[ 46.961755] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 =
00 00 00 00 00 00
[ 46.972704] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 =
00 00 00 00 00 00
[ 46.983480] em28xx #0: EEPROM ID=3D 0x9567eb1a, EEPROM hash =3D 0x2d=
e5abbf
[ 46.994127] em28xx #0: EEPROM info:
[ 47.004768] em28xx #0: AC97 audio (5 sample rates)
[ 47.015532] em28xx #0: 500mA max power
[ 47.026194] em28xx #0: Table at 0x27, strings=3D0x168e, 0x1ca4=
, 0x246a
[ 47.118089] input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000=
:00:1a.7/usb1/1-3/input/input6
[ 47.186548] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 20 (level, lo=
w) -> IRQ 23
[ 47.197498] Vortex: init.... em28xx #0: Config register raw data: 0x=
d0
[ 47.259584] em28xx #0: AC97 vendor ID =3D 0xffffffff
[ 47.270945] em28xx #0: AC97 features =3D 0x6a90
[ 47.281843] em28xx #0: Empia 202 AC97 audio processor detected
[ 47.377814] em28xx #0: v4l2 driver version 0.1.2
[ 47.480729] em28xx #0: V4L2 device registered as /dev/video0 and /de=
v/vbi0
[ 47.491553] usbcore: registered new interface driver em28xx
[ 47.502375] em28xx driver loaded
[ 47.866639] xc2028 0-0061: creating new instance
[ 47.877624] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
[ 47.888597] em28xx #0/2: xc3028 attached
[ 47.899512] DVB: registering new adapter (em28xx #0)
[ 47.910493] DVB: registering adapter 0 frontend 0 (LG Electronics LG=
DT3303 VSB/QAM Frontend)...
[ 47.921867] Successfully loaded em28xx-dvb
[ 47.933257] Em28xx: Initialized (Em28xx dvb Extension) extension
[ 48.639971] done.
[ 48.696420] gameport: AU88x0 Gameport is pci0000:06:00.0/gameport0, =
speed 596kHz
[ 48.869430] loop: module loaded
[ 48.906864] lp0: using parport0 (interrupt-driven).
[ 48.918367] lp1: using parport1 (polling).
[ 49.037457] it87: Found IT8718F chip at 0x290, revision 5
[ 49.048437] it87: in3 is VCC (+5V)
[ 49.227251] Adding 9863868k swap on /dev/sda5. Priority:-1 extents:=
1 across:9863868k
[ 49.671109] EXT3 FS on sda1, internal journal
[ 50.274615] kjournald starting. Commit interval 5 seconds
[ 50.275004] EXT3 FS on sdb1, internal journal
[ 50.275008] EXT3-fs: mounted filesystem with ordered data mode.
[ 50.868230] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 50.885931] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 53.396969] HTB: quantum of class 20002 is small. Consider r2q chang=
e.
[ 53.406812] HTB: quantum of class 20004 is small. Consider r2q chang=
e.
[ 53.408246] HTB: quantum of class 20005 is small. Consider r2q chang=
e.
[ 53.416163] tcindex_init(tp f7018a80)
[ 53.416165] tcindex_get(tp f7018a80,handle 0x00000000)
[ 53.416167] tcindex_change(tp f7018a80,handle 0x00000000,tca f7ca366=
0,arg f51afca0),opt f5996630,p f697d440,r 00000000,*arg 0x0
[ 53.416170] tcindex_dump(tp f7018a80,fh 0x0,skb f687a6c0,t f55bb010)=
,p f697d440,r 00000000,b f55bb038
[ 53.416172] p->perfect f5993c00 p->h 00000000
[ 53.416865] tcindex_get(tp f7018a80,handle 0x00000004)
[ 53.416867] tcindex_change(tp f7018a80,handle 0x00000004,tca f7ca366=
0,arg f501dca0),opt f5996030,p f697d440,r 00000000,*arg 0x0
[ 53.416870] tcindex_dump(tp f7018a80,fh 0x0,skb f6842900,t f55bb010)=
,p f697d440,r 00000000,b f55bb038
[ 53.416872] p->perfect f5993c00 p->h 00000000
[ 53.417556] tcindex_get(tp f7018a80,handle 0x00000003)
[ 53.417558] tcindex_change(tp f7018a80,handle 0x00000003,tca f7ca366=
0,arg f51a5ca0),opt f6eb0a30,p f697d440,r 00000000,*arg 0x0
[ 53.417562] tcindex_dump(tp f7018a80,fh 0x0,skb f683f240,t f59a1010)=
,p f697d440,r 00000000,b f59a1038
[ 53.417563] p->perfect f5993c00 p->h 00000000
[ 53.418245] tcindex_get(tp f7018a80,handle 0x00000002)
[ 53.418247] tcindex_change(tp f7018a80,handle 0x00000002,tca f7ca366=
0,arg f5133ca0),opt f5996630,p f697d440,r 00000000,*arg 0x0
[ 53.418250] tcindex_dump(tp f7018a80,fh 0x0,skb f6951540,t f55bb010)=
,p f697d440,r 00000000,b f55bb038
[ 53.418252] p->perfect f5993c00 p->h 00000000
[ 53.418946] tcindex_get(tp f7018a80,handle 0x00000001)
[ 53.418949] tcindex_change(tp f7018a80,handle 0x00000001,tca f7ca366=
0,arg f50e3ca0),opt f6eb0030,p f697d440,r 00000000,*arg 0x0
[ 53.418952] tcindex_dump(tp f7018a80,fh 0x0,skb f683fc00,t f59a1010)=
,p f697d440,r 00000000,b f59a1038
[ 53.418953] p->perfect f5993c00 p->h 00000000
[ 53.427994] u32 classifier
[ 53.427995] Actions configured=20
[ 54.060535] No dock devices found.
[ 56.502420] eth1: no IPv6 routers present
[ 57.051700] eth0: no IPv6 routers present
[ 61.135182] apm: BIOS not found.
[ 68.323825] ppdev: user-space parallel port driver
[ 69.107634] audit(1245711348.345:2): type=3D1503 operation=3D"inode_=
permission" requested_mask=3D"a::" denied_mask=3D"a::" name=3D"/dev/tty=
" pid=3D8614 profile=3D"/usr/sbin/cupsd" namespace=3D"default"
[ 75.402541] NET: Registered protocol family 17

Device is removed:

[ 148.085377] usb 1-3: USB disconnect, address 2
[ 148.098527] em28xx #0: disconnecting em28xx #0 video
[ 148.198316] em28xx #0: V4L2 device /dev/vbi0 deregistered
[ 148.198343] em28xx #0: V4L2 device /dev/video0 deregistered
[ 148.198537] xc2028 0-0061: destroying instance

Device is plugged back in:

[ 167.080235] usb 1-1: new high speed USB device using ehci_hcd and ad=
dress 3
[ 167.238263] usb 1-1: configuration #1 chosen from 1 choice
[ 167.238333] em28xx: New device Pinnacle Systems PCTV 800e @ 480 Mbps=
(2304:0227, interface 0, class 0)
[ 167.238338] em28xx #0: Identified as Pinnacle PCTV HD Pro Stick (car=
d=3D17)
[ 167.242572] em28xx #0: chip ID is em2882/em2883
[ 167.452168] em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 27 02 d0 12 =
5c 03 8e 16 a4 1c
[ 167.452179] em28xx #0: i2c eeprom 10: 6a 24 27 57 46 07 01 00 00 00 =
00 00 00 00 00 00
[ 167.452191] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 =
00 00 5b 1c 00 00
[ 167.452214] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 =
00 00 00 00 00 00
[ 167.452220] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 =
00 00 00 00 00 00
[ 167.452226] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 =
00 00 00 00 00 00
[ 167.452232] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 =
24 03 50 00 69 00
[ 167.452238] em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 =
65 00 20 00 53 00
[ 167.452244] em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 =
73 00 00 00 16 03
[ 167.452251] em28xx #0: i2c eeprom 90: 50 00 43 00 54 00 56 00 20 00 =
38 00 30 00 30 00
[ 167.452257] em28xx #0: i2c eeprom a0: 65 00 00 00 1c 03 30 00 36 00 =
31 00 30 00 30 00
[ 167.452263] em28xx #0: i2c eeprom b0: 31 00 30 00 33 00 39 00 34 00 =
34 00 32 00 00 00
[ 167.452269] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 =
00 00 00 00 00 00
[ 167.452275] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 =
00 00 00 00 00 00
[ 167.452281] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 =
00 00 00 00 00 00
[ 167.452287] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 =
00 00 00 00 00 00
[ 167.452294] em28xx #0: EEPROM ID=3D 0x9567eb1a, EEPROM hash =3D 0x2d=
e5abbf
[ 167.452296] em28xx #0: EEPROM info:
[ 167.452297] em28xx #0: AC97 audio (5 sample rates)
[ 167.452298] em28xx #0: 500mA max power
[ 167.452300] em28xx #0: Table at 0x27, strings=3D0x168e, 0x1ca4=
, 0x246a
[ 167.463188] input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000=
:00:1a.7/usb1/1-1/input/input7
[ 167.542180] em28xx #0: Config register raw data: 0xd0
[ 167.542930] em28xx #0: AC97 vendor ID =3D 0xffffffff
[ 167.543303] em28xx #0: AC97 features =3D 0x6a90
[ 167.543305] em28xx #0: Empia 202 AC97 audio processor detected
[ 167.623206] em28xx #0: v4l2 driver version 0.1.2
[ 167.706140] em28xx #0: V4L2 device registered as /dev/video0 and /de=
v/vbi0
[ 167.790026] xc2028 0-0061: creating new instance
[ 167.790030] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
[ 167.790032] em28xx #0/2: xc3028 attached
[ 167.790034] DVB: registering new adapter (em28xx #0)
[ 167.790037] DVB: registering adapter 0 frontend 0 (LG Electronics LG=
DT3303 VSB/QAM Frontend)...
[ 167.790200] Successfully loaded em28xx-dvb


_________________________________________________________________
Lauren found her dream laptop. Find the PC that=92s right for you.
http://www.microsoft.com/windows/choosepc/?ocid=3Dftp_val_wl_290--
To unsubscribe from this list: send the line "unsubscribe linux-media" =
in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Devin Heitmueller
2009-06-22 21:53:34 UTC
Permalink
Hello again. =A0I have some updates now that I've been able to make s=
ome further tests.
<snip>

Also, do you have the device plugged in via a powered USB hub? And if
so, are you unplugging the 800e from the hub, or are you unplugging
the hub from the PC?

Devin

--=20
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com
--
To unsubscribe from this list: send the line "unsubscribe linux-media" =
in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
George Adams
2009-06-25 05:17:25 UTC
Permalink
Hello! In a last ditch effort, I decided to try downloading a v4l driver snapshot from February back when I had my Pinnacle HD Pro Stick device working. To my amazement, the old drivers worked!

By process of elimination (trying newer and newer drivers until my Pinnacle device was once again not recognized), it appears that changeset 11331 (http://linuxtv.org/hg/v4l-dvb/rev/00525b115901), from Mar. 31 2009, is the first one that causes my device to not be recognized. This is the changeset that updated the em28xx driver from 0.1.1 to 0.1.2. Here, again, is the dmesg output from a newer driver that does NOT work (this one from a driver set one day later, on Apr. 1, 2009):

[ 50.028008] Vortex: init.... Linux video capture interface: v2.00
[ 50.300176] em28xx: New device Pinnacle Systems PCTV 800e @ 480 Mbps (2304:0227, interface 0, class 0)
[ 50.312863] em28xx #0: Identified as Pinnacle PCTV HD Pro Stick (card=17)
[ 50.325625] em28xx #0: chip ID is em2882/em2883
[ 50.539728] em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 27 02 d0 12 5c 03 8e 16 a4 1c
[ 50.552582] em28xx #0: i2c eeprom 10: 6a 24 27 57 46 07 01 00 00 00 00 00 00 00 00 00
[ 50.565276] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b 1c 00 00
[ 50.577939] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00
[ 50.590583] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 50.603076] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 50.615380] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 24 03 50 00 69 00
[ 50.627589] em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00
[ 50.639651] em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 00 00 16 03
[ 50.651573] em28xx #0: i2c eeprom 90: 50 00 43 00 54 00 56 00 20 00 38 00 30 00 30 00
[ 50.663407] em28xx #0: i2c eeprom a0: 65 00 00 00 1c 03 30 00 36 00 31 00 30 00 30 00
[ 50.675144] em28xx #0: i2c eeprom b0: 31 00 30 00 33 00 39 00 34 00 34 00 32 00 00 00
[ 50.686680] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 50.698183] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 50.698187] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 50.698193] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 50.698197] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x2de5abbf
[ 50.698198] em28xx #0: EEPROM info:
[ 50.698199] em28xx #0: AC97 audio (5 sample rates)
[ 50.698200] em28xx #0: 500mA max power
[ 50.698201] em28xx #0: Table at 0x27, strings=0x168e, 0x1ca4, 0x246a
[ 50.805990] input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1a.7/usb7/7-3/input/input6
[ 50.901902] em28xx #0: Config register raw data: 0xd0
[ 50.913510] em28xx #0: AC97 vendor ID = 0xffffffff
[ 50.924746] em28xx #0: AC97 features = 0x6a90
[ 50.935543] em28xx #0: Empia 202 AC97 audio processor detected
[ 51.034109] em28xx #0: v4l2 driver version 0.1.2
[ 51.128411] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
[ 51.139183] usbcore: registered new interface driver em28xx
[ 51.149961] em28xx driver loaded
[ 51.496978] xc2028 0-0061: creating new instance
[ 51.521582] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
[ 51.532725] em28xx #0/2: xc3028 attached
[ 51.546910] DVB: registering new adapter (em28xx #0)
[ 51.570086] DVB: registering adapter 0 frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend)...
[ 51.581731] Successfully loaded em28xx-dvb
[ 51.593250] Em28xx: Initialized (Em28xx dvb Extension) extension

and here is a successful dmesg using the changeset 11330 drivers from early morning Mar. 31, 2009, right before the em28xx version bump from 0.1.1 to 0.1.2

[ 48.484051] Linux video capture interface: v2.00
[ 48.597772] em28xx: New device Pinnacle Systems PCTV 800e @ 480 Mbps (2304:0227, interface 0, class 0)
[ 48.610698] em28xx #0: Identified as Pinnacle PCTV HD Pro Stick (card=17)
[ 48.623638] ACPI: PCI Interrupt 0000:06:01.0[A] -> em28xx #0: chip ID is em2882/em2883
[ 48.877223] em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 27 02 d0 12 5c 03 8e 16 a4 1c
[ 48.889807] em28xx #0: i2c eeprom 10: 6a 24 27 57 46 07 01 00 00 00 00 00 00 00 00 00
[ 48.902235] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b 1c 00 00
[ 48.914771] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00
[ 48.927131] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 48.939329] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 48.951368] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 24 03 50 00 69 00
[ 48.963320] em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00
[ 48.975173] em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 00 00 16 03
[ 48.986933] em28xx #0: i2c eeprom 90: 50 00 43 00 54 00 56 00 20 00 38 00 30 00 30 00
[ 48.998563] em28xx #0: i2c eeprom a0: 65 00 00 00 1c 03 30 00 36 00 31 00 30 00 30 00
[ 49.010036] em28xx #0: i2c eeprom b0: 31 00 30 00 33 00 39 00 34 00 34 00 32 00 00 00
[ 49.021412] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 49.032663] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 49.043684] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 49.054604] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 49.065433] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x2de5abbf
[ 49.076067] em28xx #0: EEPROM info:
[ 49.086543] em28xx #0: AC97 audio (5 sample rates)
[ 49.097031] em28xx #0: 500mA max power
[ 49.107535] em28xx #0: Table at 0x27, strings=0x168e, 0x1ca4, 0x246a
[ 49.133912] tvp5150' 0-005c: chip found @ 0xb8 (em28xx #0)
[ 49.187077] Vortex: init.... tuner' 0-0061: chip found @ 0xc2 (em28xx #0)
[ 49.339702] xc2028 0-0061: creating new instance
[ 49.350347] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
[ 49.535114] xc2028 0-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[ 49.607496] xc2028 0-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
[ 50.562362] xc2028 0-0061: Loading firmware for type=MTS (4), id 000000000000b700.
[ 50.588826] xc2028 0-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700.
[ 50.822296] input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1a.7/usb7/7-3/input/input6
[ 50.912302] em28xx #0: Config register raw data: 0xd0
[ 50.925029] em28xx #0: AC97 vendor ID = 0xffffffff
[ 50.937390] em28xx #0: AC97 features = 0x6a90
[ 50.949396] em28xx #0: Empia 202 AC97 audio processor detected
[ 51.112296] tvp5150' 0-005c: tvp5150am1 detected.
[ 51.222535] em28xx #0: v4l2 driver version 0.1.1
[ 51.338304] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
[ 51.350590] usbcore: registered new interface driver em28xx
[ 51.362736] em28xx driver loaded
[ 51.575368] xc2028 0-0061: attaching existing instance
[ 51.587569] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
[ 51.599746] em28xx #0/2: xc3028 attached
[ 51.611796] DVB: registering new adapter (em28xx #0)
[ 51.623825] DVB: registering adapter 0 frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend)...
[ 51.636297] Successfully loaded em28xx-dvb
[ 51.648448] Em28xx: Initialized (Em28xx dvb Extension) extension
[ 77.339398] tvp5150' 0-005c: tvp5150am1 detected.

Notice that the tvp5150 device is being recognized and the firmware from /lib/firmware/xc3028-v27.fw is being loaded.

If need be, I guess I can continue to use this changeset, the last known revision of the em28xx drivers that work with my card. But I thought I'd mention my discovery, in case someone more clever than I can discover what happened that caused the problem. (Devin, I know you mentioned that you have the same Pinnacle device that I have, and yet yours still works even under the most recent drivers. Could we have slightly different devices, with mine containing some "feature" that has caused it to stop functioning with the latest em28xx drivers?)

Again, thanks to everyone who helped. If this should go in a bug report, I will happy to do so if someone indicates that.
lsusb -v -s 7:2
Bus 007 Device 002: ID 2304:0227 Pinnacle Systems, Inc. [hex]
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x2304 Pinnacle Systems, Inc. [hex]
idProduct 0x0227
bcdDevice 1.10
iManufacturer 3 Pinnacle Systems
iProduct 1 PCTV 800e
iSerial 2 061001039442
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 305
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 255
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 11
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 4
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 255
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 11
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x00c4 1x 196 bytes
bInterval 4
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0234 1x 564 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 2
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 255
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 11
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0ad4 2x 724 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x00c4 1x 196 bytes
bInterval 4
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0234 1x 564 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 3
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 255
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 11
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0c00 2x 1024 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x00c4 1x 196 bytes
bInterval 4
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0234 1x 564 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 4
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 255
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 11
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x1300 3x 768 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x00c4 1x 196 bytes
bInterval 4
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0234 1x 564 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 5
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 255
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 11
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x135c 3x 860 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x00c4 1x 196 bytes
bInterval 4
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0234 1x 564 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 6
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 255
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 11
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x13c4 3x 964 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x00c4 1x 196 bytes
bInterval 4
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0234 1x 564 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 7
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 255
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 11
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x1400 3x 1024 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x00c4 1x 196 bytes
bInterval 4
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0234 1x 564 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)

_________________________________________________________________
Insert movie times and more without leaving Hotmail®.
http://windowslive.com/Tutorial/Hotmail/QuickAdd?ocid=TXT_TAGLM_WL_HM_Tutorial_QuickAdd_062009
Devin Heitmueller
2009-06-25 13:14:42 UTC
Permalink
Hello!  In a last ditch effort, I decided to try downloading a v4l driver snapshot from February back when I had my Pinnacle HD Pro Stick device working.  To my amazement, the old drivers worked!
Interesting. What distro and version of the kernel are you running?

Yesterday Michael Krufky pointed out to me that the v4l subdev
registration is broken for the au0828 driver when using the current
tip against Ubuntu Hardy (2.6.24), so it now seems likely that it's
the exact same issue.

Thanks for taking the time to narrow down the actual change that
caused the issue.

I guess somebody is going to have to build a box with Hardy and debug
this issue. :-/

Devin
--
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com
Robert Krakora
2009-06-23 02:40:13 UTC
Permalink
Hello again. =A0I have some updates now that I've been able to make s=
ome further tests.
1) My Pinnacle PCTV HD Pro (800e) stick does, in fact, work correctly=
under Windows. =A0The scanning detects the one channel we're running o=
ver our closed circuit cable (channel 3) and displays it on-screen just=
fine. =A0(audio over channel 3 works as well)
2) Devin, my installation process is "hg clone http://linuxtv.org/hg/=
v4l-dvb; cd v4l-dvb; make rminstall; make distclean; make; make install=
" =A0This appears to install everything v4l-related as modules in the a=
=A0uname -r
2.6.24-24-server
find /lib/modules/`uname -r` -type f -name em28xx\* -o -name tvp\*
/lib/modules/2.6.24-24-server/kernel/drivers/media/video/tvp5150.ko
/lib/modules/2.6.24-24-server/kernel/drivers/media/video/em28xx/em28x=
x.ko
/lib/modules/2.6.24-24-server/kernel/drivers/media/video/em28xx/em28x=
x-dvb.ko
3) tvtime still hangs when launched.
4) Running zapping gives the error "VBI Initialization failed. =A0/de=
v/vbi0 (Pinnacle PCTV HD Pro) is not a raw vbi device)". =A0Continuing =
on and trying to choose the "Preferences" menu option segfaults the pro=
gram (and this is the Ubuntu-distributed "zapping" package)
mplayer -vo xv tv:// -tv driver=3Dv4l2:alsa:immediatemode=3D0:adevic=
e=3Dhw.1,0:norm=3Dntsc:chanlist=3Dus-cable:channel=3D3
MPlayer 1.0rc2-4.2.4 (C) 2000-2007 MPlayer Team
, Model: 23, Stepping: 10)
CPUflags: =A0MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled with runtime CPU detection.
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote =
control.
Playing tv://.
TV file format detected.
Selected driver: v4l2
=A0name: Video 4 Linux 2 input
=A0author: Martin Olschewski
=A0comment: first try, more to come ;-)
Selected device: Pinnacle PCTV HD Pro Stick
=A0Capabilites: =A0video capture =A0tuner =A0audio =A0read/write =A0s=
treaming
=A0supported norms: 0 =3D NTSC; 1 =3D NTSC-M; 2 =3D NTSC-M-JP; 3 =3D =
NTSC-M-KR; 4 =3D NTSC-443; 5 =3D PAL; 6 =3D PAL-BG; 7 =3D PAL-H; 8 =3D =
PAL-I; 9 =3D PAL-DK; 10 =3D PAL-M; 11 =3D PAL-N; 12 =3D PAL-Nc; 13 =3D =
PAL-60; 14 =3D SECAM;
=A0inputs: 0 =3D Television; 1 =3D Composite1; 2 =3D S-Video;
=A0Current input: 0
=A0Current format: YUYV
v4l2: current audio mode is : MONO
v4l2: ioctl set format failed: Invalid argument
v4l2: ioctl set format failed: Invalid argument
v4l2: ioctl set format failed: Invalid argument
Selected channel: 3 (freq: 61.250)
Video buffer shorter than 3 times audio frame duration.
You will probably experience heavy framedrops.
v4l2: ioctl query control failed: Invalid argument
v4l2: ioctl query control failed: Invalid argument
v4l2: ioctl query control failed: Invalid argument
v4l2: ioctl query control failed: Invalid argument
xscreensaver_disable: Could not find XScreenSaver window.
GNOME screensaver disabled
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D
Opening video decoder: [raw] RAW Uncompressed Video
VDec: vo config request - 640 x 480 (preferred colorspace: Packed YUY=
2)
VDec: using Packed YUY2 as output csp (no 0)
Movie-Aspect is undefined - no prescaling applied.
VO: [xv] 640x480 =3D> 640x480 Packed YUY2
Selected video codec: [rawyuy2] vfm: raw (RAW YUY2)
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D
Forced audio codec: mad
Opening audio decoder: [pcm] Uncompressed PCM audio decoder
AUDIO: 44100 Hz, 1 ch, s16le, 705.6 kbit/100.00% (ratio: 88200->88200=
)
Selected audio codec: [pcm] afm: pcm (Uncompressed PCM)
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D
AO: [pulse] 44100Hz 1ch s16le (2 bytes per sample)
Starting playback...
v4l2: select timeout
A: =A0 0.5 V: =A0 0.0 A-V: =A00.472 ct: =A00.000 =A0 1/ =A01 ??% ??% =
??,?% 1 0 [[JMA: =A0 0.9 V: =A0 0.0 A-V: =A00.940 ct: =A00.003 =A0 2/ =A0=
2 ??% ??% ??,?% 2 0 [[JMv4l2: select timeout
A: =A0 1.5 V: =A0 0.0 A-V: =A01.479 ct: =A00.007 =A0 3/ =A03 ??% ??% =
??,?% 3 0 [[JMA: =A0 2.0 V: =A0 0.0 A-V: =A01.981 ct: =A00.010 =A0 4/ =A0=
4 ??% ??% ??,?% 4 0 [[JMv4l2: select timeout
A: =A0 2.5 V: =A0 0.0 A-V: =A02.485 ct: =A00.013 =A0 5/ =A05 ??% ??% =
??,?% 5 0 [[JMA: =A0 3.0 V: =A0 0.0 A-V: =A02.957 ct: =A00.017 =A0 6/ =A0=
6 ??% ??% ??,?% 6 0 [[JMv4l2: select timeout
A: =A0 3.5 V: =A0 0.0 A-V: =A03.460 ct: =A00.020 =A0 7/ =A07 ??% ??% =
??,?% 7 0 [[JMA: =A0 4.0 V: =A0 0.0 A-V: =A03.956 ct: =A00.022 =A0 8/ =A0=
8 ??% ??% ??,?% 8 0 [[JMv4l2: select timeout
A: =A0 4.5 V: =A0 0.0 A-V: =A04.460 ct: =A00.025 =A0 9/ =A09 ??% ??% =
??,?% 9 0 [[JMA: =A0 5.0 V: =A0 0.0 A-V: =A04.956 ct: =A00.027 =A010/ 1=
0 ??% ??% ??,?% 10 0 [[JMv4l2: select timeout
The Mplayer screen itself remains green the whole time.
So the surprise to me is that the Pinnacle device is not actually bro=
ken. =A0By this point, I had been sure it was a hardware problem. =A0No=
w I realize that it's something else. =A0And so I would again appreciat=
e any suggestions you might have. =A0Thank you once again!
(My installation process, just for reference, distilled down:)
cd /usr/local/src
hg clone http://linuxtv.org/hg/v4l-dvb
cd v4l-dvb
make rminstall; make distclean; make; make install
cd /tmp
wget http://www.steventoth.net/linux/xc5000/HVR-12x0-14x0-17x0_1_25_=
25271_WHQL.zip
unzip -j HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip Driver85/hcw85bda.sy=
s
perl /usr/local/src/v4l-dvb/linux/Documentation/video4linux/extract_=
xc3028.pl
mv xc3028-v27.fw /lib/firmware/xc3028-v27.fw
_________________________________________________________________
Hotmail=AE has ever-growing storage! Don=92t worry about storage limi=
ts.
http://windowslive.com/Tutorial/Hotmail/Storage?ocid=3DTXT_TAGLM_WL_H=
M_Tutorial_Storage_062009
--
video4linux-list mailing list
bscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
George:

Hello. Try playing your audio only channel with this mplayer command l=
ine:

mplayer -vc dummy -vo null tv:// -tv
driver=3Dv4l2:alsa:immediatemode=3D0:adevice=3Dhw.1,0:norm=3Dntsc:chanl=
ist=3Dus-cable:channel=3D3

Best Regards,

--=20
Rob Krakora
Senior Software Engineer
MessageNet Systems
101 East Carmel Dr. Suite 105
Carmel, IN 46032
(317)566-1677 Ext. 206
(317)663-0808 Fax
--
To unsubscribe from this list: send the line "unsubscribe linux-media" =
in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Robert Krakora
2009-06-23 02:48:31 UTC
Permalink
On Mon, Jun 22, 2009 at 10:40 PM, Robert
Hello again. =A0I have some updates now that I've been able to make =
some further tests.
1) My Pinnacle PCTV HD Pro (800e) stick does, in fact, work correctl=
y under Windows. =A0The scanning detects the one channel we're running =
over our closed circuit cable (channel 3) and displays it on-screen jus=
t fine. =A0(audio over channel 3 works as well)
2) Devin, my installation process is "hg clone http://linuxtv.org/hg=
/v4l-dvb; cd v4l-dvb; make rminstall; make distclean; make; make instal=
l" =A0This appears to install everything v4l-related as modules in the =
=A0uname -r
2.6.24-24-server
find /lib/modules/`uname -r` -type f -name em28xx\* -o -name tvp\*
/lib/modules/2.6.24-24-server/kernel/drivers/media/video/tvp5150.ko
/lib/modules/2.6.24-24-server/kernel/drivers/media/video/em28xx/em28=
xx.ko
/lib/modules/2.6.24-24-server/kernel/drivers/media/video/em28xx/em28=
xx-dvb.ko
3) tvtime still hangs when launched.
4) Running zapping gives the error "VBI Initialization failed. =A0/d=
ev/vbi0 (Pinnacle PCTV HD Pro) is not a raw vbi device)". =A0Continuing=
on and trying to choose the "Preferences" menu option segfaults the pr=
ogram (and this is the Ubuntu-distributed "zapping" package)
mplayer -vo xv tv:// -tv driver=3Dv4l2:alsa:immediatemode=3D0:adevi=
ce=3Dhw.1,0:norm=3Dntsc:chanlist=3Dus-cable:channel=3D3
MPlayer 1.0rc2-4.2.4 (C) 2000-2007 MPlayer Team
6, Model: 23, Stepping: 10)
CPUflags: =A0MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled with runtime CPU detection.
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote=
control.
Playing tv://.
TV file format detected.
Selected driver: v4l2
=A0name: Video 4 Linux 2 input
=A0author: Martin Olschewski
=A0comment: first try, more to come ;-)
Selected device: Pinnacle PCTV HD Pro Stick
=A0Capabilites: =A0video capture =A0tuner =A0audio =A0read/write =A0=
streaming
=A0supported norms: 0 =3D NTSC; 1 =3D NTSC-M; 2 =3D NTSC-M-JP; 3 =3D=
NTSC-M-KR; 4 =3D NTSC-443; 5 =3D PAL; 6 =3D PAL-BG; 7 =3D PAL-H; 8 =3D=
PAL-I; 9 =3D PAL-DK; 10 =3D PAL-M; 11 =3D PAL-N; 12 =3D PAL-Nc; 13 =3D=
PAL-60; 14 =3D SECAM;
=A0inputs: 0 =3D Television; 1 =3D Composite1; 2 =3D S-Video;
=A0Current input: 0
=A0Current format: YUYV
v4l2: current audio mode is : MONO
v4l2: ioctl set format failed: Invalid argument
v4l2: ioctl set format failed: Invalid argument
v4l2: ioctl set format failed: Invalid argument
Selected channel: 3 (freq: 61.250)
Video buffer shorter than 3 times audio frame duration.
You will probably experience heavy framedrops.
v4l2: ioctl query control failed: Invalid argument
v4l2: ioctl query control failed: Invalid argument
v4l2: ioctl query control failed: Invalid argument
v4l2: ioctl query control failed: Invalid argument
xscreensaver_disable: Could not find XScreenSaver window.
GNOME screensaver disabled
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D
Opening video decoder: [raw] RAW Uncompressed Video
VDec: vo config request - 640 x 480 (preferred colorspace: Packed YU=
Y2)
VDec: using Packed YUY2 as output csp (no 0)
Movie-Aspect is undefined - no prescaling applied.
VO: [xv] 640x480 =3D> 640x480 Packed YUY2
Selected video codec: [rawyuy2] vfm: raw (RAW YUY2)
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D
Forced audio codec: mad
Opening audio decoder: [pcm] Uncompressed PCM audio decoder
AUDIO: 44100 Hz, 1 ch, s16le, 705.6 kbit/100.00% (ratio: 88200->8820=
0)
Selected audio codec: [pcm] afm: pcm (Uncompressed PCM)
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D
AO: [pulse] 44100Hz 1ch s16le (2 bytes per sample)
Starting playback...
v4l2: select timeout
A: =A0 0.5 V: =A0 0.0 A-V: =A00.472 ct: =A00.000 =A0 1/ =A01 ??% ??%=
??,?% 1 0 [[JMA: =A0 0.9 V: =A0 0.0 A-V: =A00.940 ct: =A00.003 =A0 2/ =
=A02 ??% ??% ??,?% 2 0 [[JMv4l2: select timeout
A: =A0 1.5 V: =A0 0.0 A-V: =A01.479 ct: =A00.007 =A0 3/ =A03 ??% ??%=
??,?% 3 0 [[JMA: =A0 2.0 V: =A0 0.0 A-V: =A01.981 ct: =A00.010 =A0 4/ =
=A04 ??% ??% ??,?% 4 0 [[JMv4l2: select timeout
A: =A0 2.5 V: =A0 0.0 A-V: =A02.485 ct: =A00.013 =A0 5/ =A05 ??% ??%=
??,?% 5 0 [[JMA: =A0 3.0 V: =A0 0.0 A-V: =A02.957 ct: =A00.017 =A0 6/ =
=A06 ??% ??% ??,?% 6 0 [[JMv4l2: select timeout
A: =A0 3.5 V: =A0 0.0 A-V: =A03.460 ct: =A00.020 =A0 7/ =A07 ??% ??%=
??,?% 7 0 [[JMA: =A0 4.0 V: =A0 0.0 A-V: =A03.956 ct: =A00.022 =A0 8/ =
=A08 ??% ??% ??,?% 8 0 [[JMv4l2: select timeout
A: =A0 4.5 V: =A0 0.0 A-V: =A04.460 ct: =A00.025 =A0 9/ =A09 ??% ??%=
??,?% 9 0 [[JMA: =A0 5.0 V: =A0 0.0 A-V: =A04.956 ct: =A00.027 =A010/ =
10 ??% ??% ??,?% 10 0 [[JMv4l2: select timeout
The Mplayer screen itself remains green the whole time.
So the surprise to me is that the Pinnacle device is not actually br=
oken. =A0By this point, I had been sure it was a hardware problem. =A0N=
ow I realize that it's something else. =A0And so I would again apprecia=
te any suggestions you might have. =A0Thank you once again!
(My installation process, just for reference, distilled down:)
cd /usr/local/src
hg clone http://linuxtv.org/hg/v4l-dvb
cd v4l-dvb
make rminstall; make distclean; make; make install
cd /tmp
wget http://www.steventoth.net/linux/xc5000/HVR-12x0-14x0-17x0_1_25=
_25271_WHQL.zip
unzip -j HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip Driver85/hcw85bda.s=
ys
perl /usr/local/src/v4l-dvb/linux/Documentation/video4linux/extract=
_xc3028.pl
mv xc3028-v27.fw /lib/firmware/xc3028-v27.fw
_________________________________________________________________
Hotmail=AE has ever-growing storage! Don=92t worry about storage lim=
its.
http://windowslive.com/Tutorial/Hotmail/Storage?ocid=3DTXT_TAGLM_WL_=
HM_Tutorial_Storage_062009
--
video4linux-list mailing list
ubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
Hello. =A0Try playing your audio only channel with this mplayer comma=
mplayer -vc dummy -vo null tv:// -tv
driver=3Dv4l2:alsa:immediatemode=3D0:adevice=3Dhw.1,0:norm=3Dntsc:cha=
nlist=3Dus-cable:channel=3D3
Best Regards,
--
Rob Krakora
Senior Software Engineer
MessageNet Systems
101 East Carmel Dr. Suite 105
Carmel, IN 46032
(317)566-1677 Ext. 206
(317)663-0808 Fax
George:

If it is not an audio only channel, then specify the video device: If
your video device may be something other than 'video0' like 'video1'.

mplayer -vo xv tv:// -tv
driver=3Dv4l2:device=3D/dev/video0:alsa:immediatemode=3D0:adevice=3Dhw.=
1,0:norm=3Dntsc:chanlist=3Dus-cable:channel=3D3

Best Regards,

--=20
Rob Krakora
Senior Software Engineer
MessageNet Systems
101 East Carmel Dr. Suite 105
Carmel, IN 46032
(317)566-1677 Ext. 206
(317)663-0808 Fax
--
To unsubscribe from this list: send the line "unsubscribe linux-media" =
in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
hermann pitton
2009-06-23 02:57:51 UTC
Permalink
Post by Robert Krakora
On Mon, Jun 22, 2009 at 10:40 PM, Robert
Hello again. I have some updates now that I've been able to make =
some further tests.
Post by Robert Krakora
1) My Pinnacle PCTV HD Pro (800e) stick does, in fact, work correc=
tly under Windows. The scanning detects the one channel we're running =
over our closed circuit cable (channel 3) and displays it on-screen jus=
t fine. (audio over channel 3 works as well)
Post by Robert Krakora
2) Devin, my installation process is "hg clone http://linuxtv.org/=
hg/v4l-dvb; cd v4l-dvb; make rminstall; make distclean; make; make inst=
all" This appears to install everything v4l-related as modules in the =
Post by Robert Krakora
uname -r
2.6.24-24-server
find /lib/modules/`uname -r` -type f -name em28xx\* -o -name tvp\=
*
Post by Robert Krakora
/lib/modules/2.6.24-24-server/kernel/drivers/media/video/tvp5150.k=
o
Post by Robert Krakora
/lib/modules/2.6.24-24-server/kernel/drivers/media/video/em28xx/em=
28xx.ko
Post by Robert Krakora
/lib/modules/2.6.24-24-server/kernel/drivers/media/video/em28xx/em=
28xx-dvb.ko
Post by Robert Krakora
3) tvtime still hangs when launched.
4) Running zapping gives the error "VBI Initialization failed. /d=
ev/vbi0 (Pinnacle PCTV HD Pro) is not a raw vbi device)". Continuing o=
n and trying to choose the "Preferences" menu option segfaults the prog=
ram (and this is the Ubuntu-distributed "zapping" package)
Post by Robert Krakora
mplayer -vo xv tv:// -tv driver=3Dv4l2:alsa:immediatemode=3D0:ade=
vice=3Dhw.1,0:norm=3Dntsc:chanlist=3Dus-cable:channel=3D3
Post by Robert Krakora
MPlayer 1.0rc2-4.2.4 (C) 2000-2007 MPlayer Team
odel: 23, Stepping: 10)
Post by Robert Krakora
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled with runtime CPU detection.
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remo=
te control.
Post by Robert Krakora
Playing tv://.
TV file format detected.
Selected driver: v4l2
name: Video 4 Linux 2 input
author: Martin Olschewski
comment: first try, more to come ;-)
Selected device: Pinnacle PCTV HD Pro Stick
Capabilites: video capture tuner audio read/write streaming
supported norms: 0 =3D NTSC; 1 =3D NTSC-M; 2 =3D NTSC-M-JP; 3 =3D=
NTSC-M-KR; 4 =3D NTSC-443; 5 =3D PAL; 6 =3D PAL-BG; 7 =3D PAL-H; 8 =3D=
PAL-I; 9 =3D PAL-DK; 10 =3D PAL-M; 11 =3D PAL-N; 12 =3D PAL-Nc; 13 =3D=
PAL-60; 14 =3D SECAM;
Post by Robert Krakora
inputs: 0 =3D Television; 1 =3D Composite1; 2 =3D S-Video;
Current input: 0
Current format: YUYV
v4l2: current audio mode is : MONO
v4l2: ioctl set format failed: Invalid argument
v4l2: ioctl set format failed: Invalid argument
v4l2: ioctl set format failed: Invalid argument
Selected channel: 3 (freq: 61.250)
Video buffer shorter than 3 times audio frame duration.
You will probably experience heavy framedrops.
v4l2: ioctl query control failed: Invalid argument
v4l2: ioctl query control failed: Invalid argument
v4l2: ioctl query control failed: Invalid argument
v4l2: ioctl query control failed: Invalid argument
xscreensaver_disable: Could not find XScreenSaver window.
GNOME screensaver disabled
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D
Post by Robert Krakora
Opening video decoder: [raw] RAW Uncompressed Video
VDec: vo config request - 640 x 480 (preferred colorspace: Packed =
YUY2)
Post by Robert Krakora
VDec: using Packed YUY2 as output csp (no 0)
Movie-Aspect is undefined - no prescaling applied.
VO: [xv] 640x480 =3D> 640x480 Packed YUY2
Selected video codec: [rawyuy2] vfm: raw (RAW YUY2)
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D
Post by Robert Krakora
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D
Post by Robert Krakora
Forced audio codec: mad
Opening audio decoder: [pcm] Uncompressed PCM audio decoder
AUDIO: 44100 Hz, 1 ch, s16le, 705.6 kbit/100.00% (ratio: 88200->88=
200)
Post by Robert Krakora
Selected audio codec: [pcm] afm: pcm (Uncompressed PCM)
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D
Post by Robert Krakora
AO: [pulse] 44100Hz 1ch s16le (2 bytes per sample)
Starting playback...
v4l2: select timeout
A: 0.5 V: 0.0 A-V: 0.472 ct: 0.000 1/ 1 ??% ??% ??,?% 1 0=
[[JMA: 0.9 V: 0.0 A-V: 0.940 ct: 0.003 2/ 2 ??% ??% ??,?% 2 0=
[[JMv4l2: select timeout
Post by Robert Krakora
A: 1.5 V: 0.0 A-V: 1.479 ct: 0.007 3/ 3 ??% ??% ??,?% 3 0=
[[JMA: 2.0 V: 0.0 A-V: 1.981 ct: 0.010 4/ 4 ??% ??% ??,?% 4 0=
[[JMv4l2: select timeout
Post by Robert Krakora
A: 2.5 V: 0.0 A-V: 2.485 ct: 0.013 5/ 5 ??% ??% ??,?% 5 0=
[[JMA: 3.0 V: 0.0 A-V: 2.957 ct: 0.017 6/ 6 ??% ??% ??,?% 6 0=
[[JMv4l2: select timeout
Post by Robert Krakora
A: 3.5 V: 0.0 A-V: 3.460 ct: 0.020 7/ 7 ??% ??% ??,?% 7 0=
[[JMA: 4.0 V: 0.0 A-V: 3.956 ct: 0.022 8/ 8 ??% ??% ??,?% 8 0=
[[JMv4l2: select timeout
Post by Robert Krakora
A: 4.5 V: 0.0 A-V: 4.460 ct: 0.025 9/ 9 ??% ??% ??,?% 9 0=
[[JMA: 5.0 V: 0.0 A-V: 4.956 ct: 0.027 10/ 10 ??% ??% ??,?% 10 =
0 [[JMv4l2: select timeout
Post by Robert Krakora
The Mplayer screen itself remains green the whole time.
So the surprise to me is that the Pinnacle device is not actually =
broken. By this point, I had been sure it was a hardware problem. Now=
I realize that it's something else. And so I would again appreciate a=
ny suggestions you might have. Thank you once again!
Post by Robert Krakora
(My installation process, just for reference, distilled down:)
cd /usr/local/src
hg clone http://linuxtv.org/hg/v4l-dvb
cd v4l-dvb
make rminstall; make distclean; make; make install
cd /tmp
wget http://www.steventoth.net/linux/xc5000/HVR-12x0-14x0-17x0_1_=
25_25271_WHQL.zip
Post by Robert Krakora
unzip -j HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip Driver85/hcw85bda=
=2Esys
Post by Robert Krakora
perl /usr/local/src/v4l-dvb/linux/Documentation/video4linux/extra=
ct_xc3028.pl
Post by Robert Krakora
mv xc3028-v27.fw /lib/firmware/xc3028-v27.fw
_________________________________________________________________
Hotmail=C2=AE has ever-growing storage! Don=E2=80=99t worry about =
storage limits.
Post by Robert Krakora
http://windowslive.com/Tutorial/Hotmail/Storage?ocid=3DTXT_TAGLM_W=
L_HM_Tutorial_Storage_062009
Post by Robert Krakora
--
video4linux-list mailing list
nsubscribe
Post by Robert Krakora
https://www.redhat.com/mailman/listinfo/video4linux-list
Hello. Try playing your audio only channel with this mplayer comma=
mplayer -vc dummy -vo null tv:// -tv
driver=3Dv4l2:alsa:immediatemode=3D0:adevice=3Dhw.1,0:norm=3Dntsc:c=
hanlist=3Dus-cable:channel=3D3
Post by Robert Krakora
Best Regards,
--
Rob Krakora
Senior Software Engineer
MessageNet Systems
101 East Carmel Dr. Suite 105
Carmel, IN 46032
(317)566-1677 Ext. 206
(317)663-0808 Fax
=20
=20
If it is not an audio only channel, then specify the video device: I=
f
Post by Robert Krakora
your video device may be something other than 'video0' like 'video1'.
=20
mplayer -vo xv tv:// -tv
driver=3Dv4l2:device=3D/dev/video0:alsa:immediatemode=3D0:adevice=3Dh=
w.1,0:norm=3Dntsc:chanlist=3Dus-cable:channel=3D3
Post by Robert Krakora
=20
Best Regards,
=20
Rob,

please take at least care to not further spread and duplicate the
advertisements for m$ bullshit here.

Cheers,
Hermann


--
To unsubscribe from this list: send the line "unsubscribe linux-media" =
in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Continue reading on narkive:
Loading...